Articles by keywords "strength"

Study of polylactide 3D-printed samples with double-layer weave

  • Year: 2022
  • Volume: 48
  • Issue: 2
  • 10
  • 106
  • Pages: 289-299

The intermetallic compounds formation and mechanical properties of composites in the Ni-Al system

  • Year: 2022
  • Volume: 48
  • Issue: 1
  • 20
  • 159
  • Pages: 136-146

Effect of grain size distribution on the yield strength of metal-graphene composites

  • Year: 2021
  • Volume: 47
  • Issue: 6
  • 54
  • 410
  • Pages: 823-829

Cold spray deposition of composite copper-tungsten coatings

  • Year: 2021
  • Volume: 47
  • Issue: 5
  • 18
  • 214
  • Pages: 787-795

Molecular dynamics study of stress-strain curves for γ-Fe and Hadfield steel ideal crystals at shear along the <111> direction

  • Year: 2021
  • Volume: 47
  • Issue: 2
  • 27
  • 286
  • Pages: 237-244

Acoustic sensing study of the physical and mechanical properties of titanium alloy Ti-6Al-4V, made by selective laser melting

  • Year: 2021
  • Volume: 47
  • Issue: 1
  • 46
  • 515
  • Pages: 139-158

Mechanical properties of epoxy resin with additives soot and nanotubes

  • Year: 2021
  • Volume: 47
  • Issue: 1
  • 58
  • 527
  • Pages: 20-30

Material behaviour during a complex stress test of thin-walled, cylindrical single-crystal specimens

  • Year: 2020
  • Volume: 46
  • Issue: 1
  • 18
  • 459
  • Pages: 182-190

Synthesis of metallic composite based on iron frame and SiC nanostructures and its strength properties

  • Year: 2020
  • Volume: 46
  • Issue: 1
  • 14
  • 467
  • Pages: 122-131

Structure and properties of argon-arc welds of high-strength steel

  • Year: 2020
  • Volume: 44
  • Issue: 3
  • 19
  • 561
  • Pages: 439-445

Mechanical and biodegradation properties of cornstarch-based bioplastic material

  • Year: 2020
  • Volume: 44
  • Issue: 3
  • 48
  • 1310
  • Pages: 380-391

Damage and fracture of viscous-plastic compressible materials

  • Year: 2020
  • Volume: 44
  • Issue: 2
  • 9
  • 506
  • Pages: 250-255

Evaluation of critical stresses for quasi-brittle materials at various loading rates

  • Year: 2020
  • Volume: 44
  • Issue: 2
  • 17
  • 485
  • Pages: 210-220

Control of the mechanical properties and microstructure of laser welded joints of the aluminum alloy V-1461 after heat treatment

  • Year: 2020
  • Volume: 43
  • Issue: 1
  • 20
  • 612
  • Pages: 1-10

The strengthening and the electrical resistivity of thermo-mechanical deformation processed Cu-Nb composite wires

  • Year: 2019
  • Volume: 42
  • Issue: 6
  • 8
  • 457
  • Pages: 731-741

Simulation of residual distributions stress in welded connection

  • Year: 2019
  • Volume: 42
  • Issue: 5
  • 14
  • 502
  • Pages: 671-689

Mechanical studies of rubber micro- and nanocomposites promising for the tire industry. Uniaxial and biaxial tests

  • Year: 2019
  • Volume: 42
  • Issue: 4
  • 12
  • 570
  • Pages: 445-454

Behavior of stainless steel at high strain rates and elevated temperatures. Experiment and mathematical modelling

  • Year: 2018
  • Volume: 40
  • Issue: 2
  • 8
  • 519
  • Pages: 133-145

Increasing the reliability the combined criteria of the static strength of a material of complexly loaded deformable structures

  • Year: 2018
  • Volume: 40
  • Issue: 1
  • 6
  • 464
  • Pages: 124-132

Micro and nanoshungites - perspective mineral fillers for rubber composites used in the tires

  • Year: 2018
  • Volume: 40
  • Issue: 1
  • 8
  • 474
  • Pages: 56-62

Additional steel fibers in concrete mixture: studies of compressive and tensile strength of concrete

  • Year: 2018
  • Volume: 37
  • Issue: 1
  • 6
  • 396
  • Pages: 104-108

Defining relations of mechanics of damaged media effected by fatigue and creep

  • Year: 2018
  • Volume: 36
  • Issue: 1
  • 2
  • 346
  • Pages: 147-153

Formation of the joint during solid-state bonding of Ni-based superalloys EP975 and EK79

  • Year: 2017
  • Volume: 33
  • Issue: 1
  • 20
  • 542
  • Pages: 57-68

Dynamic strength properties of an ultra-fine-grained aluminum alloy under tension conditions

  • Year: 2017
  • Volume: 32
  • Issue: 3
  • 5
  • 444
  • Pages: 258-261

Mathematical model of ultrasound transmission in gradient materials synthesized in arc surfacing under contact loading

  • Year: 2017
  • Volume: 32
  • Issue: 2
  • 2
  • 411
  • Pages: 186-193

Numerical methods for calculating the strength and stability of stiffened orthotropic shells

  • Year: 2017
  • Volume: 31
  • Issue: 1/2
  • 4
  • 309
  • Pages: 16-19

Finite-element models of mechanical characteristics of "(nano)metal-graphene" nanocomposites

  • Year: 2017
  • Volume: 30
  • Issue: 1
  • 5
  • 487
  • Pages: 86-92

A modern experimental-theoretical approach to rationally designing novel technological objects

  • Year: 2016
  • Volume: 28
  • Issue: 1/2
  • 2
  • 450
  • Pages: 106-109

Features of microstructure and mechanical characteristics of a laminated composite with high specific strength and moderate heat resistance

  • Year: 2016
  • Volume: 25
  • Issue: 1
  • 2
  • 435
  • Pages: 83-89

Assissment of operability of the heat resisting HP40Nb at overheats to 1150 °C

  • Year: 2016
  • Volume: 25
  • Issue: 1
  • 5
  • 463
  • Pages: 56-61

Preparation and characteristics heat-resistant composites with high specific strength developing

  • Year: 2016
  • Volume: 25
  • Issue: 1
  • 1
  • 421
  • Pages: 37-41

Strengthening mechanisms and properties of composite materials with carbon nanofibres

  • Year: 2016
  • Volume: 25
  • Issue: 1
  • 4
  • 408
  • Pages: 30-36

Influence of patch parameters on damage and residual strength of adhesively bonded composite repair under fatigue loading

  • Year: 2015
  • Volume: 24
  • Issue: 4
  • 2
  • 311
  • Pages: 391-402

Effect of heat treatment on the mechanical properties of ultrafine-grained aluminium

  • Year: 2015
  • Volume: 24
  • Issue: 4
  • 2
  • 376
  • Pages: 319-324

Strength and electrical conductivity of ultrafine-grained aluminum alloy Al-2Fe subjected to annealing and straining

  • Year: 2015
  • Volume: 24
  • Issue: 3
  • 4
  • 536
  • Pages: 297-307

Microstructure, strength and fatigue of an ultrafine-grained Al-Cu-Mg alloy

  • Year: 2015
  • Volume: 24
  • Issue: 3
  • 1
  • 405
  • Pages: 232-238

The structural model of strength of nanocomposites poly(methyl methacrylate)/functionalized carbon nanotubes

  • Year: 2015
  • Volume: 24
  • Issue: 2
  • 1
  • 343
  • Pages: 187-193

Strength characteristics of copper-graphene nanocomposites

  • Year: 2015
  • Volume: 24
  • Issue: 1
  • 3
  • 419
  • Pages: 86-96

Structural-temporal approach for dynamic strength characterization of rock

  • Year: 2015
  • Volume: 23
  • Issue: 1
  • 5
  • 404
  • Pages: 61-65

Mechanical characteristics of graphene sheets containing high-density ensembles of 5-8-5 defects

  • Year: 2014
  • Volume: 21
  • Issue: 3
  • 4
  • 416
  • Pages: 275-282

Influence of catalytic graphitization on mechanical properties of carbonized biocarbon

  • Year: 2014
  • Volume: 21
  • Issue: 2
  • 4
  • 413
  • Pages: 200-205

Dynamic strength of nitrogen steels

  • Year: 2014
  • Volume: 21
  • Issue: 2
  • 4
  • 469
  • Pages: 99-111

Modelling of the fine precipitates effect strengthening of Al-Mg-Si alloys under ageing

  • Year: 2014
  • Volume: 21
  • Issue: 1
  • 2
  • 457
  • Pages: 29-37

Evaluation of fracture incubation time from quasistatic tensile strength experiment

  • Year: 2014
  • Volume: 19
  • Issue: 1
  • 3
  • 437
  • Pages: 16-24

Dynamic behaviour of concrete and mortar at high strain rates

  • Year: 2013
  • Volume: 18
  • Issue: 2
  • 1
  • 429
  • Pages: 101-107

Strength of Al2O3-SiC-BN-Si3N4-based ceramics

  • Year: 2013
  • Volume: 18
  • Issue: 1
  • 6
  • 459
  • Pages: 93-100

Mechanical properties of polypropylene reinforced hemp fiber composite

  • Year: 2012
  • Volume: 15
  • Issue: 2
  • 2
  • 362
  • Pages: 119-125

Agglomerate Size in Precursors and Mechanical Strength of Solid Electrolytes Based on Y2O3-ZrO2, Ce2O3-ZrO2 and Ce2O3-Y2O3-ZrO2 Systems

  • Year: 2012
  • Volume: 14
  • Issue: 1
  • 1
  • 424
  • Pages: 1-10

Carbon Nanofiber/Clinker Hybrid Material as a Highly Efficient Modificator of Mortal Mechanical Properties

  • Year: 2012
  • Volume: 13
  • Issue: 1
  • 0
  • 403
  • Pages: 77-84

Correlation between the Precursor Dispersity and Mechanical Strength of Solid Electrolytes Based on Ce2O3-ZrO2 System

  • Year: 2011
  • Volume: 11
  • Issue: 2
  • 1
  • 416
  • Pages: 183-189

Agglomerate Size in Precursors and Mechanical Strength of Solid Elestrolytes Based on Y2O3-ZrO2 System

  • Year: 2011
  • Volume: 11
  • Issue: 1
  • 3
  • 425
  • Pages: 68-75

Threshold Regimes and Micromechanisms of Dynamic Straining

  • Year: 2011
  • Volume: 11
  • Issue: 1
  • 3
  • 461
  • Pages: 23-59

Grain Boundary Sliding and Nanocrack Generation near Crack Tips in Nanocrystalline Metals and Ceramics

  • Year: 2010
  • Volume: 10
  • Issue: 1/2
  • 3
  • 440
  • Pages: 37-46

Long-term Strength Prediction for Chromium-Nickel Austenitic Steels Based on Short-term Experimental Results

  • Year: 2004
  • Volume: 7
  • Issue: 1
  • 1
  • 382
  • Pages: 72-78

Yield Stress of Nanocrystalline Materials

  • Year: 2002
  • Volume: 5
  • Issue: 1
  • 1
  • 376
  • Pages: 16-22

Role of Mesostructure Effects in Dynamic Plasticity and Strength of Ductile Steels

  • Year: 2001
  • Volume: 3
  • Issue: 1
  • 4
  • 467
  • Pages: 63-100