Articles by keywords "PLA"
Multiple surface crack interaction of non-coplanar cracks
- Year: 2026
- Volume: 54
- Issue: 1
- 25
- 934
- Pages: 57-72
The influence of microplastic deformation on the performance of a shape memory alloy vibration protection system: a modeling study
- Year: 2026
- Volume: 54
- Issue: 1
- 30
- 894
- Pages: 42-56
Elastodynamic response of photothermoelastic plate with moisture due to various sources
- Year: 2025
- Volume: 53
- Issue: 6
- 11
- 978
- Pages: 145-163
Polylactic acid filaments reinforced with natural fique fibers for 3D printing applications
- Year: 2025
- Volume: 53
- Issue: 6
- 40
- 1312
- Pages: 116-129
Experimental and numerical study of energy absorption in bio-inspired scutoid cellular structures
- Year: 2025
- Volume: 53
- Issue: 6
- 28
- 1130
- Pages: 63-81
Systematic all-round examination of the viscoelastoplastic properties of nanocomposites with increased wear resistance based on polytetrafluoroethylene. Part 2
- Year: 2025
- Volume: 53
- Issue: 4
- 38
- 1455
- Pages: 131-168
Experimental and numerical determination of mechanical properties of porous thermoplastic
- Year: 2025
- Volume: 53
- Issue: 4
- 37
- 1316
- Pages: 66-75
Systematic all-round examination of the viscoelastoplastic properties of nanocomposites with increased wear resistance based on polytetrafluoroethylene. Part 1
- Year: 2025
- Volume: 53
- Issue: 3
- 41
- 1509
- Pages: 177-218
Temperature-dependent phase leg and non-local thermoelastic damping and frequency shift in thermoelastic plates
- Year: 2025
- Volume: 53
- Issue: 3
- 25
- 1561
- Pages: 94-115
Static and dynamic analysis of trapezoidal cantilever plates
- Year: 2025
- Volume: 53
- Issue: 3
- 43
- 1580
- Pages: 9-23
Gradient energy-absorbing nature-inspired metamaterial based on the "Schwarz Primitive" geometry
- Year: 2025
- Volume: 53
- Issue: 2
- 33
- 1725
- Pages: 157-167
Elastic-plastic deformation when bending rotating workpieces
- Year: 2025
- Volume: 53
- Issue: 2
- 6
- 1454
- Pages: 113-122
Effect of high pressure torsion and annealing on the microstructure and microhardness of Inconel 718 produced by selective laser melting
- Year: 2025
- Volume: 53
- Issue: 1
- 69
- 3753
- Pages: 109-116
Modeling of working cycles of thermomechanical actuators based on shape memory alloys at repeated actuation
- Year: 2024
- Volume: 52
- Issue: 6
- 49
- 3547
- Pages: 81-90
Quasi-static thermal response of a circular plate due to the influence of memory-dependent derivatives
- Year: 2024
- Volume: 52
- Issue: 4
- 33
- 3425
- Pages: 163-172
Hybrid of a nonlinear Maxwell-type viscoelastoplastic model with the linear viscoelasticity constitutive constitutive equation and properties of crossbred creep and stress-strain curves
- Year: 2024
- Volume: 52
- Issue: 4
- 27
- 3606
- Pages: 114-140
Structure and strength of Mg-Zn-Zr alloy subjected to high pressure torsion
- Year: 2024
- Volume: 52
- Issue: 4
- 50
- 3857
- Pages: 81-90
Thermal analysis of wear of polymer-polymer friction pairs in vacuum and atmosphere conditions
- Year: 2024
- Volume: 52
- Issue: 4
- 40
- 4103
- Pages: 63-80
Ultrasonic layer-by-layer treatment of PN85Y15 coating as a way to increase wear resistance of friction pair with bronze
- Year: 2024
- Volume: 52
- Issue: 4
- 30
- 3473
- Pages: 52-62
Chromium plating of steel parts using the thermoemission field
- Year: 2024
- Volume: 52
- Issue: 3
- 54
- 2224
- Pages: 154-160
Laboratory study on use of lime and waste materials in improving geotechnical properties of clay
- Year: 2024
- Volume: 52
- Issue: 3
- 79
- 2518
- Pages: 121-144
Interaction of two circular holes in an infinite plate by body force method
- Year: 2024
- Volume: 52
- Issue: 3
- 48
- 2331
- Pages: 96-107
Experimental determination of physical, chemical and surface properties of biocompatible thermoplastic
- Year: 2024
- Volume: 52
- Issue: 3
- 141
- 2484
- Pages: 1-12
Effect of plasticizers of different polarity on dynamic mechanical properties of butyl rubber
- Year: 2024
- Volume: 52
- Issue: 2
- 51
- 2851
- Pages: 133-141
Stability analysis of solid morphology incorporating surface elasticity and surface tension
- Year: 2024
- Volume: 52
- Issue: 2
- 25
- 2359
- Pages: 114-122
Influence of aging on fatigue strength of carbon fiber reinforced plastics
- Year: 2024
- Volume: 52
- Issue: 1
- 36
- 2614
- Pages: 118-125
Stiffness characteristics of implanted steel plates after exposure to corrosion
- Year: 2023
- Volume: 51
- Issue: 7
- 27
- 2350
- Pages: 117-123
Assessment of physical and vibration damping characteristics of sisal/PLA biodegradable composite
- Year: 2023
- Volume: 51
- Issue: 7
- 31
- 2589
- Pages: 107-116
Modal and harmonic analysis of the rotor system involving four different materials by finite element code: Ansys workbench
- Year: 2023
- Volume: 51
- Issue: 7
- 40
- 2870
- Pages: 63-98
Nanomaterials coating for bio-implant applications: a re-analysis
- Year: 2023
- Volume: 51
- Issue: 6
- 25
- 2296
- Pages: 92-106
Influence of material anisotropy on the interaction between cracks under tension and shear
- Year: 2023
- Volume: 51
- Issue: 5
- 30
- 2533
- Pages: 24-37
Simulation of the stress-strain state of a rectangular bar using fast trigonometric interpolation in various statements of boundary value problems
- Year: 2023
- Volume: 51
- Issue: 4
- 18
- 2166
- Pages: 160-171
The effect of ZnO cupping layer on the formation of sol-gel synthesized Ag nanoparticles
- Year: 2023
- Volume: 51
- Issue: 4
- 45
- 2883
- Pages: 76-84
Study of the microstructure effect of SPD-treated titanium on microhardness and corrosion resistance in physiological environments for implantology purposes
- Year: 2023
- Volume: 51
- Issue: 4
- 60
- 2557
- Pages: 1-10
Applied theory of bending of a functional-gradient bimorph
- Year: 2023
- Volume: 51
- Issue: 3
- 25
- 2476
- Pages: 88-104
Effect of annealing and additional deformation on the microstructure and mechanical properties of ultrafine-grained Al5083 alloy
- Year: 2023
- Volume: 51
- Issue: 3
- 31
- 2536
- Pages: 20-28
Finite-strain elastic-plastic torsion: comparison of von Mises and Tresca materials
- Year: 2023
- Volume: 51
- Issue: 2
- 34
- 2750
- Pages: 140-150
Exact elastoplastic analysis of a rotating hollow cylinder made of power-law hardening material
- Year: 2023
- Volume: 51
- Issue: 2
- 26
- 2592
- Pages: 96-111
Mechanism of fracture toughness enhancement in bimodal metal-graphene composites with nanotwinned structure
- Year: 2023
- Volume: 51
- Issue: 2
- 44
- 2940
- Pages: 58-64
On the unloading dynamics in an elastic/viscoplastic material predeformed by viscometric twisting
- Year: 2023
- Volume: 51
- Issue: 1
- 35
- 2519
- Pages: 68-83
Simulation of the plastic deformation of shape memory alloys considering shear anisotropy on the slip plane
- Year: 2023
- Volume: 51
- Issue: 1
- 52
- 2771
- Pages: 61-67
Wave propagation in a nonlocal rotating micropolar piezoelectric solid
- Year: 2023
- Volume: 51
- Issue: 1
- 39
- 2535
- Pages: 42-60
Epitaxial stabilization of α-Ga2O3 layers grown on r-plane sapphire
- Year: 2023
- Volume: 51
- Issue: 1
- 126
- 2985
- Pages: 1-9
Grain-boundary nanoprecipitates-mediated mechanism of strengthening in Al-Cu-Zr alloy structured by high-pressure torsion
- Year: 2022
- Volume: 50
- Issue: 3
- 31
- 2927
- Pages: 431-438
Effect of plasticizers on the mechanical and technological properties of styrene-isoprene block copolymer composites under cyclic loading
- Year: 2022
- Volume: 50
- Issue: 2
- 52
- 2784
- Pages: 355-363
Finite element algorithm for implementing variants of physically nonlinear defining equations in the calculation of an ellipsoidal shell
- Year: 2022
- Volume: 50
- Issue: 2
- 9
- 2557
- Pages: 319-330
Hybrid modeling of gas-dynamic processes in AC plasma torches
- Year: 2022
- Volume: 50
- Issue: 2
- 35
- 2527
- Pages: 287-303
Comparative study of grain fragmentation in iron during cold and warm deformation by uniaxial tension
- Year: 2022
- Volume: 50
- Issue: 2
- 38
- 2624
- Pages: 239-251
Modeling of unsteady elastic diffusion transverse vibrations of the isotropic simply supported Timoshenko plate
- Year: 2022
- Volume: 50
- Issue: 1
- 18
- 2858
- Pages: 141-157
Modelling of composite materials with thermoplastic matrices, carbon fibres, and nanoparticles
- Year: 2022
- Volume: 49
- Issue: 1
- 64
- 2538
- Pages: 182-192
Rate-independent selection of slip patterns on grain and subgrain scales: state of the art
- Year: 2022
- Volume: 49
- Issue: 1
- 24
- 2696
- Pages: 160-172
Maxwell electrodynamics in media, geometry effect on constitutive relations
- Year: 2022
- Volume: 49
- Issue: 1
- 50
- 2699
- Pages: 1-16
An out-of-plane oscillating beam nanoresonator with ultrahigh intrinsic quality factor
- Year: 2022
- Volume: 48
- Issue: 3
- 26
- 2656
- Pages: 407-418
Effect of Si+ ion irradiation of α-Ga2O3 epitaxial layers on their hydrogen sensitivity
- Year: 2022
- Volume: 48
- Issue: 3
- 88
- 2866
- Pages: 301-307
Unstable plastic flow in structural materials: time series for analysis of experimental data
- Year: 2022
- Volume: 48
- Issue: 2
- 35
- 2856
- Pages: 208-216
Analysis of CuCrZr/316L(N) bimetallic joint with and without nickel interlayer for plasma-facing components
- Year: 2022
- Volume: 48
- Issue: 2
- 33
- 2670
- Pages: 184-198
Wave propagation due to laser irradiation in viscoelastic thin metal film with fractional relaxation operator
- Year: 2022
- Volume: 48
- Issue: 1
- 30
- 2575
- Pages: 30-43
Epoxy-polyester coatings with additives of PTFE particles and nanoparticles of SiO2
- Year: 2022
- Volume: 48
- Issue: 1
- 63
- 2990
- Pages: 20-29
Features of obtaining powders for additive machines by plasma spraying
- Year: 2021
- Volume: 47
- Issue: 6
- 34
- 2881
- Pages: 843-855
The mechanical properties improvement of thermoplastics-based fiber metal laminates
- Year: 2021
- Volume: 47
- Issue: 4
- 50
- 2943
- Pages: 592-599
Ballistic response and induced damage of plain and reinforced concrete plates
- Year: 2021
- Volume: 47
- Issue: 4
- 68
- 3495
- Pages: 557-568
Physical-mechanical and structural properties of phase-separated polyurethane surface treated in argon plasma.
- Year: 2021
- Volume: 47
- Issue: 3
- 44
- 3042
- Pages: 527-541
Research of failure process of carbon fiber reinforcement plastic specimens with diagnosing of microstructural destruction by means of acoustic microscopy .
- Year: 2021
- Volume: 47
- Issue: 3
- 45
- 4032
- Pages: 514-526
Deformation instability in crystalline alloys: Luders bands
- Year: 2021
- Volume: 47
- Issue: 3
- 35
- 4216
- Pages: 431-437
Influence of Mg and Cu on the dynamic yield stress of aluminium alloys
- Year: 2021
- Volume: 47
- Issue: 3
- 45
- 2736
- Pages: 408-415
Deformation of a rectangular plate medium thickness from orthotropic differently resistant material
- Year: 2021
- Volume: 47
- Issue: 2
- 24
- 2496
- Pages: 359-385
Influence of the size of turmeric microparticles reinforcing agent on mechanical and biodegradation properties of cornstarch-based bioplastic material: current studies, experimental results, and proposal material crack phenomena during mechanical t
- Year: 2021
- Volume: 47
- Issue: 2
- 55
- 3283
- Pages: 266-284
Some theorems and wave propagation in a piezothermoelastic medium with two-temperature and fractional order derivative
- Year: 2021
- Volume: 47
- Issue: 2
- 24
- 3411
- Pages: 196-218
Thermoelectric viscoelastic spherical cavity with memory-dependent derivative
- Year: 2021
- Volume: 47
- Issue: 2
- 54
- 3039
- Pages: 170-185
Melt rheological behaviour and mechanical properties of poly(lactic acid)/high density polyethylene blends
- Year: 2021
- Volume: 47
- Issue: 1
- 56
- 3227
- Pages: 103-116
Asymptotical regimes of the hydrofracturing planar 3D model
- Year: 2021
- Volume: 47
- Issue: 1
- 21
- 2997
- Pages: 89-102
Distribution of plastic deformation along the perimeter of circular specimen of thin-wall fuel-element cladding during its expansion
- Year: 2021
- Volume: 47
- Issue: 1
- 35
- 3193
- Pages: 74-88
Mechanical properties of epoxy resin with additives soot and nanotubes
- Year: 2021
- Volume: 47
- Issue: 1
- 80
- 3344
- Pages: 20-30
Material behaviour during a complex stress test of thin-walled, cylindrical single-crystal specimens
- Year: 2020
- Volume: 46
- Issue: 1
- 27
- 3012
- Pages: 182-190
The influence of turmeric microparticles amount on the mechanical and biodegradation properties of cornstarch-based bioplastic material: from bioplastic literature review to experiments
- Year: 2020
- Volume: 46
- Issue: 1
- 88
- 4195
- Pages: 99-114
Study of the deformation and fracture of zirconium alloys under dynamic loading
- Year: 2020
- Volume: 46
- Issue: 1
- 39
- 3207
- Pages: 88-98
Autowave mechanism of localization of low-temperature plastic deformation
- Year: 2020
- Volume: 46
- Issue: 1
- 12
- 3071
- Pages: 64-69
Effect of the specimen size on necking development in metals and alloys during superplastic deformation
- Year: 2020
- Volume: 46
- Issue: 1
- 81
- 3595
- Pages: 1-6
Mechanical and biodegradation properties of cornstarch-based bioplastic material
- Year: 2020
- Volume: 44
- Issue: 3
- 261
- 6702
- Pages: 380-391
On the influence of multiple surface defects on the behavior of media of different rheology
- Year: 2020
- Volume: 44
- Issue: 3
- 31
- 2994
- Pages: 306-315
Stress-strain hysteresis shape estimation of different soils using deformation-history integral (DHI) model
- Year: 2020
- Volume: 44
- Issue: 2
- 19
- 4621
- Pages: 221-228
Strain-hardening effect on critical strain assessment of pipe plastic bending at buckling
- Year: 2020
- Volume: 44
- Issue: 1
- 12
- 3244
- Pages: 48-60
Probing of polycrystalline magnesium at ultrasonic frequencies by mechanical spectroscopy
- Year: 2020
- Volume: 44
- Issue: 1
- 21
- 3697
- Pages: 19-25
Physical fundamentals of thermomechanical processing in ultrafine-grained metallic materials manufacturing
- Year: 2020
- Volume: 43
- Issue: 1
- 22
- 3641
- Pages: 50-58
Analysis of the degree isotropic deformation, strength and structure steel samples after severe deformation by shifting
- Year: 2020
- Volume: 43
- Issue: 1
- 19
- 3508
- Pages: 44-49
Multilevel models of inelastic deformation: determination of stable low angle boundaries pages
- Year: 2019
- Volume: 42
- Issue: 6
- 10
- 3234
- Pages: 784-796
Simulation of residual distributions stress in welded connection
- Year: 2019
- Volume: 42
- Issue: 5
- 36
- 3455
- Pages: 671-689
Shear anisotropy in Si-Cu interfaces on the atomic scale
- Year: 2019
- Volume: 42
- Issue: 5
- 16
- 3276
- Pages: 646-655
Nonlinear dynamics of serrated deformation of metals at low temperatures
- Year: 2019
- Volume: 42
- Issue: 5
- 11
- 3194
- Pages: 602-608
Mechanical aspects of the behavior of the surface of coated bodies when exposed to corrosive liquid
- Year: 2019
- Volume: 42
- Issue: 5
- 7
- 3320
- Pages: 558-563
On the plasticization of highly-filled polyphenylene sulfoney
- Year: 2019
- Volume: 42
- Issue: 5
- 14
- 3281
- Pages: 535-543
Modeling of elastoplastic deformation of structural steel by a trajectory containing three circles touching internally
- Year: 2019
- Volume: 42
- Issue: 5
- 12
- 3315
- Pages: 528-534
Ultrasonic inspection of anisotropic laminate plates immersed in acoustic medium
- Year: 2019
- Volume: 42
- Issue: 5
- 13
- 3388
- Pages: 491-501
Applied element method in the solution of plane problems in the theory of creep
- Year: 2019
- Volume: 42
- Issue: 4
- 17
- 3152
- Pages: 455-460
Modeling of elastoplastic steel deformation in two-link broken trajectories and delaying of vector and scalar material properties
- Year: 2019
- Volume: 42
- Issue: 4
- 5
- 3226
- Pages: 436-444
Model for the formation of GaAs-Au axial nanowire heterostructures under flash lamp annealing
- Year: 2019
- Volume: 42
- Issue: 4
- 3
- 3247
- Pages: 373-379
Modeling plastic deformation and damage accumulation processes in structural steels under block non-symmetric low-cycle loading
- Year: 2019
- Volume: 42
- Issue: 3
- 7
- 3346
- Pages: 359-366
Numerical method of single-crystal turbine blade static strength estimation taking into account plasticity and creep effects
- Year: 2019
- Volume: 42
- Issue: 3
- 20
- 3352
- Pages: 311-322
A molecular dynamics study of the buckling behaviour of graphene-reinforced aluminum nanocomposite plate
- Year: 2019
- Volume: 42
- Issue: 2
- 21
- 3354
- Pages: 234-241
Applied theory of bending vibrations of a piezoelectric bimorph with a quadratic electric potential distribution
- Year: 2019
- Volume: 42
- Issue: 1
- 18
- 3500
- Pages: 65-73
Geometry of GaAs nanowire seeds in SiOx/Si (111) templates
- Year: 2019
- Volume: 42
- Issue: 1
- 12
- 3262
- Pages: 14-19
Added mass study of plane structures at their various motions
- Year: 2019
- Volume: 41
- Issue: 1
- 14
- 3473
- Pages: 116-124
Nanostructured composite materials for 3D elements of advanced optical systems
- Year: 2019
- Volume: 41
- Issue: 1
- 6
- 3213
- Pages: 69-73
Theoretical and experimental study of plastic anisotropy of Al-1Mn alloy taking into account the crystallographic orientation of the structure
- Year: 2018
- Volume: 40
- Issue: 2
- 6
- 3180
- Pages: 274-284
Multiblock copoly(urethane-amide-imide)s with the properties of thermoplastic elastomers
- Year: 2018
- Volume: 40
- Issue: 2
- 26
- 3377
- Pages: 221-230
Experimental study of the influence of the type of stress-strain state on the dynamic compressibility of spheroplastic
- Year: 2018
- Volume: 40
- Issue: 2
- 5
- 3042
- Pages: 146-151
Behavior of stainless steel at high strain rates and elevated temperatures. Experiment and mathematical modelling
- Year: 2018
- Volume: 40
- Issue: 2
- 19
- 3302
- Pages: 133-145
Adaptation of the magnetic pulse method for conductive materials testing
- Year: 2018
- Volume: 40
- Issue: 1
- 36
- 3436
- Pages: 117-123
"Wandering" natural frequencies of an elastic cuspidal plate with the clamped peak
- Year: 2018
- Volume: 40
- Issue: 1
- 4
- 3073
- Pages: 47-55
Modeling the interply slip during forming of thermoplastic laminates
- Year: 2018
- Volume: 40
- Issue: 1
- 12
- 3102
- Pages: 22-36
Development of microplasma spraying technology for applying biocompatible coatings
- Year: 2018
- Volume: 39
- Issue: 1
- 19
- 3064
- Pages: 102-110
On the development of the new technology of severe plastic deformation in metal forming
- Year: 2018
- Volume: 38
- Issue: 1
- 8
- 3498
- Pages: 76-81
On anisotropy of mechanical properties of aluminum alloys under high temperature deformation
- Year: 2018
- Volume: 38
- Issue: 1
- 11
- 3341
- Pages: 69-75
Microstructure evolution of a Ti/TiB metal-matrix composite during high-temperature deformation
- Year: 2018
- Volume: 38
- Issue: 1
- 24
- 3591
- Pages: 54-63
Superplasticity of bottom ash reinforced aluminum metal matrix composite
- Year: 2018
- Volume: 37
- Issue: 2
- 3
- 2873
- Pages: 205-211
Magnetic field sensor for non-invasive control medical implants
- Year: 2018
- Volume: 37
- Issue: 2
- 7
- 3025
- Pages: 146-152
A boundary element approach for 3D transient dynamic problems of moderately thick multilayered anisotropic elastic composite plates
- Year: 2018
- Volume: 37
- Issue: 1
- 5
- 3057
- Pages: 79-83
Results of computer modelling of a composite poroviscoelastic prismatic solid dynamics
- Year: 2018
- Volume: 37
- Issue: 1
- 2
- 3088
- Pages: 73-78
Stress-strain state in the corner points of a clamped plate under uniformly distributed normal load
- Year: 2018
- Volume: 36
- Issue: 1
- 5
- 2885
- Pages: 142-146
Approximate analytical approach in analyzing an orthotropic rectangular plate with a crack
- Year: 2018
- Volume: 36
- Issue: 1
- 11
- 2921
- Pages: 137-141
Investigation of the process of deformation and destruction of thin beryllium foils under static loading by external pressure
- Year: 2018
- Volume: 36
- Issue: 1
- 12
- 3052
- Pages: 100-113
Applied theory of micropolar elastic thin plates with constrained rotation and the finite element method
- Year: 2018
- Volume: 35
- Issue: 1
- 5
- 3071
- Pages: 145-154
Plane wave and fundamental solution in thermoporoelastic medium
- Year: 2018
- Volume: 35
- Issue: 1
- 5
- 3166
- Pages: 101-114
The solutions of nonlinear equations of plane deformation of the crystal media allowing martensitic transformations: complex representation for macrofield equations
- Year: 2018
- Volume: 35
- Issue: 1
- 23
- 3544
- Pages: 1-9
Numerical simulation of superplastic roll-forming of a hollow shaft out of nickel-based superalloy
- Year: 2017
- Volume: 33
- Issue: 1
- 21
- 3370
- Pages: 171-177
Plastic deformation of the Ni-Mn-Ga alloy by multiple isothernal forging
- Year: 2017
- Volume: 33
- Issue: 1
- 28
- 3805
- Pages: 124-136
Effect of aging and re-aging on nanostructuring and strenghening of severely deformed aluminum alloy
- Year: 2017
- Volume: 33
- Issue: 1
- 17
- 3418
- Pages: 113-123
Influence of the structure on the deformation ability of the Fe-Cr-Co system alloys
- Year: 2017
- Volume: 33
- Issue: 1
- 7
- 3188
- Pages: 104-112
Superplasticity of Al-Mg-Sc(Zr) alloys, subjected to intense plastic deformation
- Year: 2017
- Volume: 33
- Issue: 1
- 22
- 3471
- Pages: 19-28
On one class of applied gradient models with simplified boundary problems
- Year: 2017
- Volume: 32
- Issue: 3
- 12
- 3494
- Pages: 353-369
Testing of steel 45 under complex loading along the cylindrical screw trajectories of deformation
- Year: 2017
- Volume: 32
- Issue: 3
- 3
- 2978
- Pages: 298-304
Experimental verification of postulate of isotropy and mathematical modeling of elastoplastic deformation processes following the complex angled nonanalytic trajectories
- Year: 2017
- Volume: 32
- Issue: 3
- 4
- 3044
- Pages: 298-304
Investigation of the influence of strain induced junction disclinations on hardening and nucleation of cracks during plastic deformation of polycrystals
- Year: 2017
- Volume: 32
- Issue: 3
- 4
- 3047
- Pages: 237-242
On calculation of effective elastic properties of materials with cracks
- Year: 2017
- Volume: 32
- Issue: 2
- 8
- 3086
- Pages: 213-221
Generalized thermoelastic axi-symmetric deformation problem in a thick circular plate with dual phase lags and two temperatures
- Year: 2017
- Volume: 32
- Issue: 2
- 4
- 3056
- Pages: 123-132
The condition of transition to unstable state (necking) of a compressible elastic-plastic medium
- Year: 2017
- Volume: 31
- Issue: 1/2
- 4
- 2884
- Pages: 89-92
The chronomechanics of deformation and strength of nanomaterials
- Year: 2017
- Volume: 31
- Issue: 1/2
- 5
- 2603
- Pages: 78-81
The generalization of the flexibility method for elastoplastic computation of rod systems
- Year: 2017
- Volume: 31
- Issue: 1/2
- 5
- 2450
- Pages: 67-70
Mechanochemical growth of an elliptical hole under normal pressure
- Year: 2017
- Volume: 31
- Issue: 1/2
- 5
- 2840
- Pages: 52-55
The numerical investigations of double-span concrete beams strengthened with fiber reinforced plastics across the oblique section
- Year: 2017
- Volume: 31
- Issue: 1/2
- 7
- 2686
- Pages: 40-43
Analyzing thick layered plates under their own weight by the method of initial functions
- Year: 2017
- Volume: 31
- Issue: 1/2
- 3
- 2479
- Pages: 36-39
Nonlinear analysis of fluid saturated soil and rock under complex hydromechanical loading on the base of poroplastic models
- Year: 2017
- Volume: 31
- Issue: 1/2
- 11
- 2886
- Pages: 32-35
The solution of boundary problems for shape memory alloy cylinder and plate
- Year: 2017
- Volume: 31
- Issue: 1/2
- 11
- 2797
- Pages: 23-27
Micromechanisms of plastic deformation in nanotwinned materials
- Year: 2017
- Volume: 30
- Issue: 1
- 15
- 3398
- Pages: 40-52
Verification of the postulate of the isotropy and numerical simulation of the deformation of materials on a complex smooth trajectories
- Year: 2016
- Volume: 29
- Issue: 2
- 9
- 3120
- Pages: 150-157
The creation of nanocoatings of various morphology on the basis of titanium dioxide on a titanium matrix for bone implant
- Year: 2016
- Volume: 29
- Issue: 2
- 9
- 3355
- Pages: 138-144
On minimum grain size in ultrafine-grained materials and Gum-metals processed by severe plastic deformation
- Year: 2016
- Volume: 29
- Issue: 1
- 5
- 3231
- Pages: 17-23
Ab initio modelling of nonlinear elastoplastic properties of diamond-like C, SiC, Si, Ge crystals upon large strainse
- Year: 2016
- Volume: 29
- Issue: 1
- 12
- 3329
- Pages: 1-16
The model of cutting problem subject to a Coulomb-Mohr yield condition
- Year: 2016
- Volume: 28
- Issue: 1/2
- 3
- 3009
- Pages: 67-71
Phenomenological and computer models of polycrystalline material inelastic deformation
- Year: 2016
- Volume: 28
- Issue: 1/2
- 7
- 2844
- Pages: 62-66
On plastic flow of solids for stress states corresponding to an edge of the Coulomb-Tresca prism
- Year: 2016
- Volume: 28
- Issue: 1/2
- 4
- 2906
- Pages: 57-61
Size effect on buckling of non-uniform circular plate made of foam material
- Year: 2016
- Volume: 28
- Issue: 1/2
- 4
- 2838
- Pages: 26-30
Stability and supercritical behaviour of thin-walled cylindrical shell with discrete aggregate in bending
- Year: 2016
- Volume: 28
- Issue: 1/2
- 2
- 2901
- Pages: 16-20
Formation of the structure and properties of a high speed steel tool by severe plastic deformation and subsequent heat treatment
- Year: 2016
- Volume: 27
- Issue: 2
- 18
- 2996
- Pages: 205-214
Processes of nanoscale ideal plastic shear in deformed nanocrystalline materials and nanowires
- Year: 2016
- Volume: 27
- Issue: 2
- 7
- 3144
- Pages: 142-170
Stability of stratified Rivlin-Ericksen (model) fluid in magnetized quantum plasma saturating a porous medium
- Year: 2016
- Volume: 27
- Issue: 2
- 2
- 3078
- Pages: 123-132
Fatigue of commercially pure titanium dental implants
- Year: 2016
- Volume: 27
- Issue: 1
- 5
- 2928
- Pages: 79-89
Fatigue of commercially pure titanium dental implants
- Year: 2016
- Volume: 27
- Issue: 1
- 7
- 2783
- Pages: 79-89
Micromechanics of twinning and detwinning processes in nanocrystalline and ultrafine-grained metals
- Year: 2016
- Volume: 27
- Issue: 1
- 2
- 3354
- Pages: 42-52
The theory of plane deformation under the conditions of austenite-martensite transformation
- Year: 2016
- Volume: 27
- Issue: 1
- 2
- 2996
- Pages: 32-41
Deformation due to various sources in transversely isotropic thermoelastic material without energy dissipation and with two-temperature
- Year: 2016
- Volume: 27
- Issue: 1
- 8
- 3036
- Pages: 22-31
Research of the stress-strain state of connections of timber structural elements on metal plates
- Year: 2016
- Volume: 26
- Issue: 1
- 4
- 2848
- Pages: 61-65
Dependence of relaxation times on the material microstructure for different mechanisms of plasticity
- Year: 2016
- Volume: 26
- Issue: 1
- 5
- 2921
- Pages: 42-44
Non-equilibrium features of continuous recrystallization process at severe plastic deformation of copper
- Year: 2016
- Volume: 26
- Issue: 1
- 3
- 3002
- Pages: 38-41
Promising methods of SPD to obtain nanostructures metallic materials
- Year: 2016
- Volume: 25
- Issue: 1
- 16
- 3104
- Pages: 77-82
Research and simulation of the deformation process of dispersion-hardened powder in a capsule
- Year: 2016
- Volume: 25
- Issue: 1
- 17
- 3347
- Pages: 68-76
Task of longitudinal rolling procedure of aluminum sheet under superplasticity conditions
- Year: 2016
- Volume: 25
- Issue: 1
- 4
- 3249
- Pages: 49-55
Effect of deformation on misorientations of grain boundaries in metallic materials
- Year: 2016
- Volume: 25
- Issue: 1
- 8
- 3026
- Pages: 42-48
Dissipation of energy and instability process in various alloys based on plastometric tests
- Year: 2016
- Volume: 25
- Issue: 1
- 3
- 2872
- Pages: 16-21
Computer modeling of metal damage during severe plastic deformation of long-length titanium billets by equal channel angular pressing conform
- Year: 2015
- Volume: 24
- Issue: 3
- 18
- 3235
- Pages: 266-277
Microstructure formation during inhomogeneous dynamic deformation produced by steel plates bonding
- Year: 2015
- Volume: 24
- Issue: 3
- 4
- 2971
- Pages: 259-265
Structural variations in low-carbon steel under severe plastic deformation by drawing, free torsion, and drawing with shear
- Year: 2015
- Volume: 24
- Issue: 3
- 3
- 3004
- Pages: 242-252
Influence of structure refinement on electroplastic effect in shape memory TiNi alloys
- Year: 2015
- Volume: 24
- Issue: 3
- 4
- 2912
- Pages: 218-223
Transfer of plastic deformation through graphene interfaces in metal-graphene nanocomposites
- Year: 2015
- Volume: 24
- Issue: 2
- 4
- 3253
- Pages: 154-162
Stability of stratified viscoelastic Rivlin-Ericksen (model) fluid/plasma in the presence of quantum physics saturating a porous medium
- Year: 2015
- Volume: 24
- Issue: 2
- 3
- 2731
- Pages: 145-153
Study of conditions for the increase of surface hydrophobization of nanostructured titanium with titanium organic nanostructures brush type on the surface
- Year: 2015
- Volume: 24
- Issue: 2
- 4
- 3274
- Pages: 129-138
Biphase filtrational model of flow materials at superplastic deformation
- Year: 2015
- Volume: 24
- Issue: 2
- 7
- 3028
- Pages: 119-128
Mathematical modeling of plastic deformation of materials on complex flat trajectories
- Year: 2015
- Volume: 24
- Issue: 2
- 11
- 2981
- Pages: 107-118
Plane waves and fundamental solution in a modified couple stress generalized thermoelastic with mass diffusion
- Year: 2015
- Volume: 24
- Issue: 1
- 5
- 2991
- Pages: 72-85
Free vibration analysis of rotating piezoelectric bar of circular cross section immersed in fluid
- Year: 2015
- Volume: 24
- Issue: 1
- 4
- 2989
- Pages: 24-34
The influence of stress distribution on stability of the displacement of conical indenter into the soil medium
- Year: 2015
- Volume: 23
- Issue: 1
- 4
- 2751
- Pages: 91-94
The identification of material parameters in nonlinear deformation models of metallic-plastic cylindrical shells under pulsed loading
- Year: 2015
- Volume: 23
- Issue: 1
- 3
- 2750
- Pages: 66-70
Influence of point defects on ultrasonic waves propagating in the thin plate
- Year: 2015
- Volume: 23
- Issue: 1
- 3
- 2738
- Pages: 20-24
Instability of solution of the dynamic sliding frictional contact problem of coupled thermoelasticity
- Year: 2015
- Volume: 23
- Issue: 1
- 4
- 2861
- Pages: 14-19
On a classification of weak discontinuities in micropolar thermoelasticity
- Year: 2015
- Volume: 23
- Issue: 1
- 6
- 2918
- Pages: 10-13
To the problem of the cylindrical product with a bottom forming process optimization under superplasticity condition
- Year: 2015
- Volume: 22
- Issue: 2
- 8
- 3129
- Pages: 191-199
The theory of plane deformation under the conditions of austenite-martensite transformation
- Year: 2015
- Volume: 22
- Issue: 2
- 4
- 2988
- Pages: 176-182
The heterogeneity of the stress-strain state during severe plastic deformation by multiple extrusion
- Year: 2015
- Volume: 22
- Issue: 2
- 13
- 3005
- Pages: 170-175
Nonlocal mechanics of nonequilibrium shock-wave processes
- Year: 2015
- Volume: 22
- Issue: 2
- 8
- 3216
- Pages: 136-156
Disturbance due to inclined load in transversely isotropic thermoelastic medium with two temperatures and without energy dissipation
- Year: 2015
- Volume: 22
- Issue: 2
- 3
- 2866
- Pages: 107-117
Thermal stresses in a circular plate by a moving heat source
- Year: 2015
- Volume: 22
- Issue: 1
- 5
- 2954
- Pages: 86-82
The mechanics of contact interaction of a rigid sphere with an elastic-plastic topocomposite
- Year: 2015
- Volume: 22
- Issue: 1
- 4
- 3055
- Pages: 20-29
Molecular dynamics study of plastic deformation mechanisms near the interphase boundary in two-dimensional bimetallic systems
- Year: 2015
- Volume: 22
- Issue: 1
- 5
- 3003
- Pages: 15-19
Reflection of plane waves in transversely isotropic micropolar viscothermoelastic solid
- Year: 2015
- Volume: 22
- Issue: 1
- 6
- 2855
- Pages: 1-14
Influence of catalytic graphitization on mechanical properties of carbonized biocarbon
- Year: 2014
- Volume: 21
- Issue: 2
- 7
- 2924
- Pages: 200-205
Dynamic response of a heat conducting solid bar of polygonal cross sections subjected to moving heat source
- Year: 2014
- Volume: 21
- Issue: 2
- 3
- 2927
- Pages: 177-193
Reflection and transmission of plane waves at the loosely bonded interface of an elastic solid half-space and a microstretch thermoelastic diffusion solid half-space
- Year: 2014
- Volume: 21
- Issue: 2
- 4
- 2922
- Pages: 147-167
Computer simulation of the dislocation ensemble kinetics in the elastic fields of mesodefects and fragmentation processes during plastic deformation
- Year: 2014
- Volume: 21
- Issue: 1
- 4
- 2577
- Pages: 78-98
Thermal analysis of bimetal plates as cooking pots: computational comparison of two geometries
- Year: 2014
- Volume: 21
- Issue: 1
- 16
- 3151
- Pages: 8-16
Plasma-mechanical oscillations in carbon nanotubes array
- Year: 2014
- Volume: 20
- Issue: 2
- 3
- 2851
- Pages: 87-91
Flexural wave motion in a heat conducting doubly connected thermo-elastic plate of polygonal cross-sections
- Year: 2014
- Volume: 19
- Issue: 1
- 3
- 2825
- Pages: 51-67
On fractional ultra-laser two-step thermoelasticity
- Year: 2013
- Volume: 18
- Issue: 2
- 6
- 2912
- Pages: 108-126
Generalized thermoelastic waves in a rotating ring shaped circular plate immersed in an inviscid fluid
- Year: 2013
- Volume: 18
- Issue: 1
- 2
- 2653
- Pages: 77-92
Heat transfer simulation and retrofit LED lamp plastic heat sink material optimization
- Year: 2013
- Volume: 17
- Issue: 2
- 11
- 3196
- Pages: 178-182
Elasto dynamic wave propagation in a transversely isotropic piezoelectric circular plate immersed in fluid
- Year: 2013
- Volume: 17
- Issue: 2
- 3
- 2822
- Pages: 158-163
Wave motion and representation of fundamental solution in electro-microstretch viscoelastic solids
- Year: 2013
- Volume: 17
- Issue: 2
- 7
- 3059
- Pages: 93-110
Intensified movement of defects during severe plastic deformation
- Year: 2012
- Volume: 15
- Issue: 1
- 6
- 2854
- Pages: 26-33
Identification of defects in a solid body on the base of surface displacements
- Year: 2012
- Volume: 15
- Issue: 1
- 7
- 3362
- Pages: 9-25
Theoretical studies of solid state dielectric parameters of hydroxyapatite
- Year: 2012
- Volume: 14
- Issue: 2
- 3
- 2762
- Pages: 145-151
Damping of Generalized Thermo Elastic Waves in a Homogeneous Isotropic Plate
- Year: 2012
- Volume: 14
- Issue: 1
- 6
- 2707
- Pages: 64-73
Plastic Deformation in Nanowires via Collective Formation of Nanodisturbances
- Year: 2012
- Volume: 14
- Issue: 1
- 5
- 3029
- Pages: 47-56
Theoretical Models of Dislocation Emission from Grain Boundaries in Deformed Nanocrystalline Materials
- Year: 2011
- Volume: 12
- Issue: 2
- 10
- 3292
- Pages: 126-160
The Choice of the Thermomechanical Treatment Steels and Alloys Based on the Structural Systematic Analysis and the Imitation Modeling
- Year: 2011
- Volume: 12
- Issue: 1
- 7
- 2864
- Pages: 30-42
Creep Life Design Criterion and Its Applications to Pressure Vessel Codes
- Year: 2011
- Volume: 11
- Issue: 2
- 6
- 3161
- Pages: 157-182
Production of Aircraft Engine Compressor Rotor Discs with Desired Service Life in Titanium Alloys
- Year: 2011
- Volume: 11
- Issue: 2
- 6
- 3075
- Pages: 118-125
Generation of New Nanoscopic Grains near Crack Tips in Deformed Nanocrystalline Materials
- Year: 2011
- Volume: 11
- Issue: 2
- 2
- 3092
- Pages: 105-117
Phase Composition and Microstructure of Ti-6Al-4V Alloy after Hydrogen-Plastic Working
- Year: 2010
- Volume: 10
- Issue: 1/2
- 5
- 2936
- Pages: 62-71
The Two-dimensional Analysis of Thickness-shear Vibrations of a Convex-convex Quartz Plates
- Year: 2004
- Volume: 7
- Issue: 1
- 3
- 2815
- Pages: 37-44
Role of Mesostructure Effects in Dynamic Plasticity and Strength of Ductile Steels
- Year: 2001
- Volume: 3
- Issue: 1
- 11
- 3168
- Pages: 63-100
A Model for the Flow of Granular Materials and its Application to Initial/Boundary Value Problems
- Year: 2001
- Volume: 3
- Issue: 1
- 2
- 2825
- Pages: 5-11
Nano-islands on Plastically Deformed Substrates with Disclinations
- Year: 2000
- Volume: 2
- Issue: 1
- 2
- 3292
- Pages: 31-36
Superplasticity and microstructure evolution in nanonickel
- Year: 2000
- Volume: 1
- Issue: 2
- 5
- 2949
- Pages: 98-102