Articles by keywords "structure"
The influence of friction stir processing on the microstructure and properties of the AD31T alloy
Medvedev A.E.
Atroshchenko V.V.
Selivanov A.S.
Bogdanov A.R.
Gorbatkov M.V.
Logachev Y.V.
Lobachev V.S.
Sadrislamov A.R.
- Year: 2023
- Volume: 51
- Issue: 4
- 10
- 160
- Pages: 38-49
Effect of annealing and additional deformation on the microstructure and mechanical properties of ultrafine-grained Al5083 alloy
- Year: 2023
- Volume: 51
- Issue: 3
- 10
- 81
- Pages: 20-28
Comparative studies (using FTIR) of structural changes in HDPE under UV aging for different commercial companies
- Year: 2023
- Volume: 51
- Issue: 2
- 25
- 456
- Pages: 122-127
Mechanism of fracture toughness enhancement in bimodal metal-graphene composites with nanotwinned structure
- Year: 2023
- Volume: 51
- Issue: 2
- 24
- 448
- Pages: 58-64
Mechanical and microstructural characteristics of underwater friction stir welded AA 6061-T6 joints using a hybrid GRA-artificial neural network approach
- Year: 2023
- Volume: 51
- Issue: 1
- 38
- 499
- Pages: 119-141
Synthesis and wear behavior of varying particle sized B4C reinforced Al2618 alloy composites
- Year: 2022
- Volume: 50
- Issue: 3
- 44
- 484
- Pages: 373-387
Effect of plasticizers on the mechanical and technological properties of styrene-isoprene block copolymer composites under cyclic loading
- Year: 2022
- Volume: 50
- Issue: 2
- 41
- 516
- Pages: 355-363
Processing and wear behavior optimization of B4C and rice husk ash dual particles reinforced ADC12 alloy composites using Taguchi method
- Year: 2022
- Volume: 50
- Issue: 2
- 37
- 439
- Pages: 304-318
Macroscopic quantum effects of electromagnetic induction in silicon nanostructures
- Year: 2022
- Volume: 50
- Issue: 2
- 7
- 336
- Pages: 252-265
Comparative study of grain fragmentation in iron during cold and warm deformation by uniaxial tension
- Year: 2022
- Volume: 50
- Issue: 2
- 28
- 398
- Pages: 239-251
Microstructural modeling and prediction of effective elastic properties in 3D reinforced composite material
- Year: 2022
- Volume: 50
- Issue: 1
- 42
- 614
- Pages: 89-106
Ab initio calculations of electronic band structure of ideal and defective CdMnS
- Year: 2022
- Volume: 48
- Issue: 3
- 17
- 516
- Pages: 419-427
Microstructure characterization of weld consumable condition on residual stress, flexural strength, and room temperature tensile tests of P92 steel
- Year: 2022
- Volume: 48
- Issue: 1
- 24
- 698
- Pages: 69-90
On physical properties of few-photon detectors based on structures with micropillars
- Year: 2021
- Volume: 47
- Issue: 6
- 37
- 1328
- Pages: 978-986
Mathematical modelling of ice beam deflection dynamics
- Year: 2021
- Volume: 47
- Issue: 6
- 34
- 1371
- Pages: 885-895
Experimental study and modeling of changing mechanical properties in tempering of bainitic-martensitic steels
- Year: 2021
- Volume: 47
- Issue: 5
- 16
- 1133
- Pages: 727-738
Multi-step dilatational inclusion in an elastically isotropic cylinder
- Year: 2021
- Volume: 47
- Issue: 5
- 38
- 1256
- Pages: 697-705
Deformation mechanism of bimodal metal-graphene composites with nanotwinned structure
- Year: 2021
- Volume: 47
- Issue: 5
- 41
- 634
- Pages: 676-680
Post-dynamic recrystallization in a heavily alloyed Ni-based superalloy
- Year: 2021
- Volume: 47
- Issue: 5
- 62
- 627
- Pages: 665-675
Effect of trace impurities on the thermoelectric properties of commercially pure aluminum
- Year: 2021
- Volume: 47
- Issue: 4
- 25
- 557
- Pages: 582-591
Study of solid state joints of copper processed by ultrasonic welding
- Year: 2021
- Volume: 47
- Issue: 4
- 46
- 945
- Pages: 569-576
Research of failure process of carbon fiber reinforcement plastic specimens with diagnosing of microstructural destruction by means of acoustic microscopy .
- Year: 2021
- Volume: 47
- Issue: 3
- 40
- 1935
- Pages: 514-526
SSRT method: application to studying the mechanism of stress corrosion cracking in steels and alloys (overview)
- Year: 2021
- Volume: 47
- Issue: 3
- 25
- 1255
- Pages: 483-492
Determination of the direction of the principal stresses in the elements of steel structures by the values of the coercive force
- Year: 2021
- Volume: 47
- Issue: 2
- 48
- 1263
- Pages: 386-397
Results of the surface morphology study of elastic self-adhesive radiation shielding coatings by atomic force microscopy
M.E. Buzoverya
Y.P. Scherbak
Vasiliy Cherkasov
Yurkin Yu.V.
Avdonin V.V.
Dmitrii Suntsov
V.O. Pilshchikov
- Year: 2021
- Volume: 47
- Issue: 1
- 23
- 868
- Pages: 117-122
Modeling microstructure evolution during thermomechanical processing and heat treatment of steels and predicting their mechanical properties
- Year: 2020
- Volume: 45
- Issue: 1
- 27
- 819
- Pages: 8-19
Structure and properties of argon-arc welds of high-strength steel
- Year: 2020
- Volume: 44
- Issue: 3
- 19
- 936
- Pages: 439-445
Research of radiation resistance of polymer composite materials
Vasiliy Cherkasov
Avdonin V.V.
Yurkin Yu.V.
Y.P. Scherbak
M.E. Buzoverya
I.A. Karpov
V.O. Pilshchikov
- Year: 2020
- Volume: 44
- Issue: 3
- 25
- 939
- Pages: 433-438
Terahertz emitters based on negative-U materials for medical applications
Bagraev N.T.
P.A. Golovin
V.S. Khromov
Klyachkin L.E.
Malyarenko A.M.
V.A. Mashkov
B.A. Novikov
A.P. Presnukhina
A.S. Reukov
K.B. Taranets
- Year: 2020
- Volume: 44
- Issue: 2
- 25
- 937
- Pages: 264-270
Nanocomposites polymer/graphene stiffness Dependence on the nanofiller structure: the fractal model
- Year: 2020
- Volume: 44
- Issue: 2
- 17
- 1010
- Pages: 159-163
Physical fundamentals of thermomechanical processing in ultrafine-grained metallic materials manufacturing
- Year: 2020
- Volume: 43
- Issue: 1
- 16
- 1024
- Pages: 50-58
Analysis of the degree isotropic deformation, strength and structure steel samples after severe deformation by shifting
- Year: 2020
- Volume: 43
- Issue: 1
- 15
- 951
- Pages: 44-49
Control of the mechanical properties and microstructure of laser welded joints of the aluminum alloy V-1461 after heat treatment
- Year: 2020
- Volume: 43
- Issue: 1
- 26
- 995
- Pages: 1-10
Czochralski grown (AlxGa1-x)2O3 crystals with variable Al content
P.N. Butenko
D.I. Panov
A.V. Kremleva
D.A. Zakgeim
A.V. Nashchekin
I.G. Smirnova
D.A. Bauman
A.E. Romanov
V.E. Bougrov
- Year: 2019
- Volume: 42
- Issue: 6
- 29
- 1240
- Pages: 802-807
Multilevel models of inelastic deformation: determination of stable low angle boundaries pages
- Year: 2019
- Volume: 42
- Issue: 6
- 5
- 898
- Pages: 784-796
On wave field formation on the surface of piezoactive bodies with inhomogeneous coating
- Year: 2019
- Volume: 42
- Issue: 6
- 8
- 883
- Pages: 749-757
Combined effect of boron alloying and ausforming on austenite transformation in low carbon steels under continuous cooling
- Year: 2019
- Volume: 42
- Issue: 5
- 9
- 959
- Pages: 609-616
Mechanical aspects of the behavior of the surface of coated bodies when exposed to corrosive liquid
- Year: 2019
- Volume: 42
- Issue: 5
- 6
- 932
- Pages: 558-563
Polycrystalline films of phosphors Cd(1-x-y-z) (CuyAgz) ZnxS on the silicon substrate with the silicon carbide buffer layer: structure and properties
- Year: 2019
- Volume: 42
- Issue: 4
- 6
- 965
- Pages: 396-406
Model for the formation of GaAs-Au axial nanowire heterostructures under flash lamp annealing
- Year: 2019
- Volume: 42
- Issue: 4
- 1
- 904
- Pages: 373-379
Effect of warm rolling on microstructure, porosity, and hardness of a spray-formed LM25 aluminum alloy
- Year: 2019
- Volume: 42
- Issue: 3
- 9
- 900
- Pages: 288-295
First principle electronic, magnetic and thermodynamic characterization of heavy fermion ternary rare earth metal alloys
- Year: 2019
- Volume: 42
- Issue: 1
- 9
- 810
- Pages: 112-130
Effect of cooling rate on the crystallization of aluminum alloys under pressure
- Year: 2019
- Volume: 41
- Issue: 1
- 6
- 903
- Pages: 88-90
Nanostructured composite materials for 3D elements of advanced optical systems
- Year: 2019
- Volume: 41
- Issue: 1
- 3
- 890
- Pages: 69-73
Effect of anodic voltage on parameters of porous alumina formed in sulfuric acid electrolytes
X. Huang
W. Su
L. Sun
J. Liu
D.A. Sasinovich
O.V. Kupreeva
D.A. Tsirkunov
G.G. Rabatuev
S.K. Lazarouk
- Year: 2019
- Volume: 41
- Issue: 1
- 7
- 921
- Pages: 62-68
Study of thermionic-tunnel component contribution in heterostructures of InGaAs/GaAs with a single quantum well by admittance methods
- Year: 2019
- Volume: 41
- Issue: 1
- 4
- 907
- Pages: 30-35
Electron tunneling to the surface states at photocatalysis
- Year: 2019
- Volume: 41
- Issue: 1
- 8
- 885
- Pages: 15-18
Mechanical impulse enhancement in a microsystem based on nanoporous silicon combustion
- Year: 2019
- Volume: 41
- Issue: 1
- 6
- 867
- Pages: 8-14
Reduction of graphene from graphene oxide in different media
- Year: 2019
- Volume: 41
- Issue: 1
- 11
- 904
- Pages: 1-7
Theoretical and experimental study of plastic anisotropy of Al-1Mn alloy taking into account the crystallographic orientation of the structure
- Year: 2018
- Volume: 40
- Issue: 2
- 3
- 889
- Pages: 274-284
Numerical analysis of effective properties of heterogeneously polarized porous piezoceramic materials with local alloying pore surfaces
- Year: 2018
- Volume: 40
- Issue: 1
- 4
- 946
- Pages: 12-21
Electronic and optic properties of transition metal dichalcogenides (MoS2, WSe2) and graphene heterostructures
- Year: 2018
- Volume: 39
- Issue: 1
- 21
- 1096
- Pages: 8-14
Carbide forming special features and fracture mechanisms under the austenitic chromium-nickel 304 steel post-life ageing
- Year: 2018
- Volume: 38
- Issue: 1
- 5
- 811
- Pages: 111-118
On the development of the new technology of severe plastic deformation in metal forming
- Year: 2018
- Volume: 38
- Issue: 1
- 7
- 1009
- Pages: 76-81
Contactless electromagnetic acoustic techniques of diagnostics and assessment of mechanical properties of steel rolled bars
- Year: 2018
- Volume: 38
- Issue: 1
- 4
- 782
- Pages: 48-53
Design and manufacturing of tailored microstructure with selective laser melting
- Year: 2018
- Volume: 38
- Issue: 1
- 19
- 1065
- Pages: 1-10
Microstructure modelling of bottom ash reinforced aluminum metal matrix composite with stress relaxation
- Year: 2018
- Volume: 37
- Issue: 2
- 8
- 656
- Pages: 198-204
Analysis of oscillation forms at defect identification in node of truss based on finite element modeling
- Year: 2018
- Volume: 37
- Issue: 2
- 5
- 883
- Pages: 192-197
Investigation of the features of stress-strain state in layered cylindrical constructions, manufactured of transverse-isotropic materials, under pulse impact
- Year: 2018
- Volume: 37
- Issue: 2
- 3
- 769
- Pages: 184-191
Study of the properties of Cu-containing polyacrylonitrile nanostructured gas-sensing films
- Year: 2018
- Volume: 37
- Issue: 2
- 6
- 680
- Pages: 109-117
On the behavior of materials with defective coating under different contact conditions
V.A. Babeshko
O.V. Evdokimova
O.M. Babeshko
M.V. Zaretskaia
E.M. Gorshkova
A.S. Mukhin
I.B. Gladskoi
- Year: 2018
- Volume: 36
- Issue: 1
- 4
- 774
- Pages: 67-75
Study of texture and microstructure formation in medium carbon steel wire submitted to combined deformation by drawing with bending and twisting
- Year: 2018
- Volume: 36
- Issue: 1
- 4
- 668
- Pages: 60-66
Design and simulation of additive manufactured structures of three-component composite material
Romashkina (Zobacheva) A.U.
Alexander Nemov
A.I. Borovkov
A.D. Novokshenov
M.V. Khovaiko
N.A. Ermolenko
- Year: 2017
- Volume: 34
- Issue: 1
- 10
- 1013
- Pages: 51-58
Modeling growth of midi-fullerenes from C48 to C72
- Year: 2017
- Volume: 34
- Issue: 1
- 5
- 1031
- Pages: 29-36
Modeling growth of midi-fullerenes from C20 to C60
- Year: 2017
- Volume: 34
- Issue: 1
- 9
- 944
- Pages: 18-28
Effect of nanostructuring of Al-6%Mg aluminum alloy cathode on the glow gas-discharge current
- Year: 2017
- Volume: 33
- Issue: 1
- 3
- 976
- Pages: 161-170
Microstructure, mechanical properties and thermal stability of the ultrafine grained Al-Mg-Sc-Zr alloy processed by multy-directional isothermal forging
- Year: 2017
- Volume: 33
- Issue: 1
- 26
- 1315
- Pages: 137-151
Plastic deformation of the Ni-Mn-Ga alloy by multiple isothernal forging
- Year: 2017
- Volume: 33
- Issue: 1
- 16
- 1079
- Pages: 124-136
Effect of aging and re-aging on nanostructuring and strenghening of severely deformed aluminum alloy
- Year: 2017
- Volume: 33
- Issue: 1
- 7
- 951
- Pages: 113-123
Influence of the structure on the deformation ability of the Fe-Cr-Co system alloys
- Year: 2017
- Volume: 33
- Issue: 1
- 1
- 846
- Pages: 104-112
Heat-resistant intermetallic alloys and composites based on titanium: microstructure, mechanical properties and possible application
- Year: 2017
- Volume: 33
- Issue: 1
- 39
- 1308
- Pages: 80-96
EBSD analysys of austenite steel microstructure after cryogenic rolling
- Year: 2017
- Volume: 33
- Issue: 1
- 12
- 1135
- Pages: 29-40
Superplasticity of Al-Mg-Sc(Zr) alloys, subjected to intense plastic deformation
- Year: 2017
- Volume: 33
- Issue: 1
- 9
- 1059
- Pages: 19-28
Fabrication of p-type transparent oxide films with delafossite structure by sol-gel processing
- Year: 2017
- Volume: 32
- Issue: 3
- 7
- 1087
- Pages: 288-292
Dynamic strength properties of an ultra-fine-grained aluminum alloy under tension conditions
- Year: 2017
- Volume: 32
- Issue: 3
- 8
- 846
- Pages: 258-261
Mechanical properties of nanostructured titanium with bioactive titanium-organic nanocoating
- Year: 2017
- Volume: 32
- Issue: 3
- 4
- 902
- Pages: 253-257
Synthesis of silver nanochains with a chemical method
- Year: 2017
- Volume: 32
- Issue: 2
- 3
- 882
- Pages: 198-206
Copper crystals with fragmented structure and developed surface in temperature fields
- Year: 2017
- Volume: 32
- Issue: 2
- 1
- 896
- Pages: 144-151
An effective method to find Green's functions for layered media
- Year: 2017
- Volume: 32
- Issue: 2
- 13
- 869
- Pages: 133-143
Carbon-based nanostructure created by Ba and Cs atomic layer deposition on the vicinal 3C-SiC(111) surfaces
- Year: 2017
- Volume: 32
- Issue: 2
- 6
- 1193
- Pages: 108-116
Structural aspects of reinforcement of nanostructured composites polymer/2D-nanofiller
- Year: 2017
- Volume: 32
- Issue: 1
- 6
- 824
- Pages: 94-101
Photoluminescence of Hg0.5Cd0.5Te structures grown with molecular-beam epitaxy
- Year: 2017
- Volume: 32
- Issue: 1
- 3
- 866
- Pages: 88-93
Multiscale simulations of novel additive manufactured continuous fiber-reinforced three-component composite material
- Year: 2017
- Volume: 32
- Issue: 1
- 17
- 1073
- Pages: 74-82
Structure and microhardness of two-layer foils of nanotwinned copper with graphene nanoinclusions
- Year: 2017
- Volume: 32
- Issue: 1
- 7
- 1015
- Pages: 58-73
Flexible polyaniline coated carbon cloth as binder-free electrode material for symmetric supercapacitor application
A.A. Klimont
S.V. Stakhanova
R.R. Galimzyanov
O.V. Uryupina
K.A. Semushin
I.S. Krechetov
M. Kundu
M.V. Astakhov
- Year: 2017
- Volume: 32
- Issue: 1
- 3
- 874
- Pages: 51-57
Heat distribution with structure in solid states
- Year: 2017
- Volume: 31
- Issue: 1/2
- 1
- 625
- Pages: 75-77
A complex analysis of stress-strain state of ribbed wooden structures with anisotropic sheathings
- Year: 2017
- Volume: 31
- Issue: 1/2
- 1
- 622
- Pages: 56-58
Localized waves in carbon nano-structures with connected and disconnected open waveguides
- Year: 2016
- Volume: 29
- Issue: 2
- 2
- 736
- Pages: 116-124
Multifarious transmission conditions in the graph models of carbon nano-structures
- Year: 2016
- Volume: 29
- Issue: 2
- 5
- 737
- Pages: 107-115
The structural properties of elastically strained InGaAlAs/InGaAs/InP heterostructures grown by molecular beam epitaxy
I.I. Novikov
A.V. Babichev
E.S. Kolodeznyi
A.S. Kurochkin
A.G. Gladyshev
L.Ya. Karachinsky
V.N. Nevedomsky
S.A. Blokhin
A.A. Blokhin
A.M. Nadtochiy
A.Yu. Egorov
- Year: 2016
- Volume: 29
- Issue: 1
- 4
- 747
- Pages: 76-81
Influence of absorber characteristics on operation regimes of passive mode locked lasers based on InGaAlAs/InGaAs/InP heterostructures
I.S. Polukhin
G.A. Mikhailovskiy
D.A. Rybalko
Yu.V. Solov'ev
E.P. Petukhov
M.A. Odnoblyudov
E.S. Kolodeznyi
A.K. Mikhailov
V.E. Bougrov
H. Lipsanen
- Year: 2016
- Volume: 29
- Issue: 1
- 2
- 794
- Pages: 71-75
A modern experimental-theoretical approach to rationally designing novel technological objects
- Year: 2016
- Volume: 28
- Issue: 1/2
- 3
- 776
- Pages: 106-109
3D fluid structure interaction problem solving method in Euler variables based on the modified Godunov scheme
- Year: 2016
- Volume: 28
- Issue: 1/2
- 6
- 783
- Pages: 1-5
Study of dynamic recrystallization high-strength low-alloyed steel with the use of physical simulation
- Year: 2016
- Volume: 27
- Issue: 2
- 5
- 886
- Pages: 215-222
Formation of the structure and properties of a high speed steel tool by severe plastic deformation and subsequent heat treatment
- Year: 2016
- Volume: 27
- Issue: 2
- 16
- 810
- Pages: 205-214
The mechanisms of reinforcement of nanostructured composites polymer/organoclay with glassy and elastomeric matrix
- Year: 2016
- Volume: 27
- Issue: 2
- 6
- 812
- Pages: 187-194
Structure and mechanical characteristics of Ni - 1 WT.% Y2O3-92ZrO2 nanocomposites fabricated by powder metallurgy method
- Year: 2016
- Volume: 27
- Issue: 1
- 3
- 723
- Pages: 90-97
Simulation operation regimes of passive mode-locked laser based on InGaAlAs/InGaAs/InP heterostructures
I.S. Polukhin
G.A. Mikhailovskiy
D.A. Rybalko
Yu.V. Solov'ev
M.A. Odnoblyudov
A.E. Gubenko
D.A. Livshits
A.N. Firsov
A.N. Kirsyaev
A.A. Efremov
V.E. Bougrov
- Year: 2016
- Volume: 27
- Issue: 1
- 1
- 746
- Pages: 74-78
Use of additional finite element method for nonlinear analysis of bar systems at limit states
- Year: 2016
- Volume: 26
- Issue: 1
- 2
- 795
- Pages: 77-80
Taking account of damping in estimating structure earthquake stability
- Year: 2016
- Volume: 26
- Issue: 1
- 2
- 716
- Pages: 57-60
Atomic force microscopy and physical - mechanical properties of new elastomer composites
- Year: 2016
- Volume: 26
- Issue: 1
- 3
- 861
- Pages: 45-48
Dependence of relaxation times on the material microstructure for different mechanisms of plasticity
- Year: 2016
- Volume: 26
- Issue: 1
- 4
- 777
- Pages: 42-44
Application of unstructured approximating meshes in discrete-continual finite element method of structural analysis
- Year: 2016
- Volume: 26
- Issue: 1
- 1
- 695
- Pages: 5-8
Features of microstructure and mechanical characteristics of a laminated composite with high specific strength and moderate heat resistance
- Year: 2016
- Volume: 25
- Issue: 1
- 3
- 799
- Pages: 83-89
Promising methods of SPD to obtain nanostructures metallic materials
- Year: 2016
- Volume: 25
- Issue: 1
- 8
- 814
- Pages: 77-82
Microstructure of "copper-graphene" composites manufactured by electrochemical deposition using graphene suspensions stabilized by non-ionic surfactants
- Year: 2015
- Volume: 24
- Issue: 4
- 3
- 753
- Pages: 382-390
Shock-induced structures in copper
Yu.I. Meshcheryakov
N.I. Zhigacheva
A.K. Divakov
G.V. Konovalov
B.K. Barakhtin
S.V. Razorenov
O.V. Vyvenko
A.S. Bondarenko
I.V. Khomskaya
- Year: 2015
- Volume: 24
- Issue: 4
- 3
- 818
- Pages: 347-358
"Nickel-YSZ-nanoceramics" nanocomposite: synthesis, structure, and mechanical properties
- Year: 2015
- Volume: 24
- Issue: 4
- 4
- 817
- Pages: 340-346
Synthesis and mechanical properties of "nanonickel-nanoceramic" composites
- Year: 2015
- Volume: 24
- Issue: 4
- 6
- 799
- Pages: 331-339
Molecular beam epitaxy grown strained heterostructures for active region of laser diode with emission wavelength 1520-1580 nm
A.V. Babichev
A.S. Kurochkin
E.S. Kolodeznyi
A.G. Gladyshev
I.I. Novikov
L.Ya. Karachinsky
A.Yu. Egorov
- Year: 2015
- Volume: 24
- Issue: 3
- 3
- 753
- Pages: 284-288
Critical thickness and bow of pseudomorphic InxGa1-xAs-based laser heterostructures grown on (001)GaAs and (001)InP substrates
- Year: 2015
- Volume: 24
- Issue: 3
- 8
- 824
- Pages: 278-283
Microstructure formation during inhomogeneous dynamic deformation produced by steel plates bonding
- Year: 2015
- Volume: 24
- Issue: 3
- 2
- 775
- Pages: 259-265
Microstructure, strength and fatigue of an ultrafine-grained Al-Cu-Mg alloy
- Year: 2015
- Volume: 24
- Issue: 3
- 1
- 760
- Pages: 232-238
Kinetics of grain refinement in metallic materials during large strain deformation
- Year: 2015
- Volume: 24
- Issue: 3
- 6
- 763
- Pages: 224-231
Influence of structure refinement on electroplastic effect in shape memory TiNi alloys
- Year: 2015
- Volume: 24
- Issue: 3
- 3
- 730
- Pages: 218-223
Elevated tribological characteristics of ultrafine grained conductive Cu-0.5Cr-0.2Zr alloy
E.A. Sarkeeva
M.M. Abramova
R.A. Oreshkina
V.D. Sitdikov
Kun Xia Wei
Wei Wei
F.F. Musin
I.V. Alexandrov
- Year: 2015
- Volume: 24
- Issue: 3
- 1
- 738
- Pages: 211-217
The structural model of strength of nanocomposites poly(methyl methacrylate)/functionalized carbon nanotubes
- Year: 2015
- Volume: 24
- Issue: 2
- 1
- 697
- Pages: 187-193
Non-trivial changes in physical and mechanical properties and structure of low carbon steel wire, produced by rolling with shear and cold drawing
- Year: 2015
- Volume: 24
- Issue: 2
- 3
- 736
- Pages: 163-177
Study of conditions for the increase of surface hydrophobization of nanostructured titanium with titanium organic nanostructures brush type on the surface
- Year: 2015
- Volume: 24
- Issue: 2
- 2
- 862
- Pages: 129-138
To the problem of the cylindrical product with a bottom forming process optimization under superplasticity condition
- Year: 2015
- Volume: 22
- Issue: 2
- 4
- 871
- Pages: 191-199
Photoemission study of nano SiC epitaxial layers synthesized by a new method of the atom substitution in Si crystal lattice
G.V. Benemanskaya
P.A. Dementev
S.A. Kukushkin
M.N. Lapushkin
A.V. Osipov
B. Senkovskiy
S.N. Timoshnev
- Year: 2015
- Volume: 22
- Issue: 2
- 5
- 830
- Pages: 183-190
The heterogeneity of the stress-strain state during severe plastic deformation by multiple extrusion
- Year: 2015
- Volume: 22
- Issue: 2
- 4
- 764
- Pages: 170-175
The theoretical analysis of stress-strain state of materials with gradient structure
- Year: 2015
- Volume: 22
- Issue: 2
- 10
- 770
- Pages: 157-169
The percolation model of nanocomposites polymer/carbon nanotubes reinforcement
- Year: 2015
- Volume: 22
- Issue: 2
- 16
- 828
- Pages: 101-106
Light-emitting p-n structures fabricated with hydride vapor-phase epitaxy on GaN/Al2O3 structured substrates
M.G. Mynbaeva
A.I. Pechnikov
Sh.Sh. Sharofidinov
V.E. Bougrov
K.D. Mynbaev
S.I. Stepanov
M.A. Odnoblyudov
V.I. Nikolaev
A.E. Romanov
- Year: 2015
- Volume: 22
- Issue: 1
- 2
- 900
- Pages: 30-38
Dynamic theory of coexisting austenite-martensite phase formation
- Year: 2014
- Volume: 21
- Issue: 3
- 3
- 777
- Pages: 230-235
Single crystals of β-Ga2O3, grown from the melt of gallium and aluminum oxides
- Year: 2014
- Volume: 21
- Issue: 2
- 16
- 905
- Pages: 194-199
Light emission from CdHgTe-based nanostructures
K.D. Mynbaev
A.V. Shilyaev
N.L. Bazhenov
A.I. Izhnin
I.I. Izhnin
A.V. Voitsekhovskii
N.N. Mikhailov
V.S. Varavin
S.A. Dvoretsky
- Year: 2014
- Volume: 21
- Issue: 2
- 4
- 745
- Pages: 112-118
Semipolar GaN on Si(001): the role of SiC buffer layer synthesized by method of substrate atom substitution
- Year: 2014
- Volume: 21
- Issue: 1
- 4
- 774
- Pages: 71-77
The theory of coexisting austenite-martensite phase formation
- Year: 2014
- Volume: 21
- Issue: 1
- 4
- 713
- Pages: 58-70
Negative differential resistance in ferromagnet/wide-gap semiconductor/ferromagnet nanostructure
- Year: 2014
- Volume: 20
- Issue: 2
- 3
- 695
- Pages: 106-110
Electrochemical codeposition of nanostructured materials for highly reliable systems
- Year: 2014
- Volume: 20
- Issue: 1
- 2
- 686
- Pages: 80-85
Ab initio simulation of two-dimensional MoS2 with vacancy clusters using GRID technologies
- Year: 2014
- Volume: 20
- Issue: 1
- 2
- 707
- Pages: 51-55
Electronic properties of quasi-two-dimensional molybdenum disulfide with Fe, Co, and Ni impurities
- Year: 2014
- Volume: 20
- Issue: 1
- 2
- 725
- Pages: 44-50
Modeling and investigations of the heterofullerenes C59X (X=Na, Li, Mg, Be)
- Year: 2013
- Volume: 18
- Issue: 1
- 1
- 691
- Pages: 63-69