Articles by keywords "Ni"
Effect of plasticizers of different polarity on dynamic mechanical properties of butyl rubber
- Year: 2024
- Volume: 52
- Issue: 2
- 7
- 88
- Pages: 133-141
Thermal transformation and mechanical properties of high-temperature-resistant matrix based polyetherketones
Shabaev A.S.
Shakhmurzova K.T.
A.A. Zhansitov
A.L. Slonov
Fomicheva I.N.
Dolbin I.V.
S.Yu. Khashirova
- Year: 2024
- Volume: 52
- Issue: 2
- 3
- 81
- Pages: 123-132
Studies of trapezoidal panels under thermo-mechanical load: a nonlinear dynamic analysis
- Year: 2024
- Volume: 52
- Issue: 2
- 4
- 82
- Pages: 90-105
Brittle vs ductile fracture behavior in ceramic materials at elevated temperature
- Year: 2024
- Volume: 52
- Issue: 2
- 6
- 86
- Pages: 82-89
In-situ high-temperature bending strength measurement of YSZ ceramics manufactured using novel B2O3-based glass binder
- Year: 2024
- Volume: 52
- Issue: 2
- 6
- 93
- Pages: 64-75
Martensite stabilization effect after high strain rate loading
- Year: 2024
- Volume: 52
- Issue: 2
- 10
- 101
- Pages: 49-55
Finite element analysis of elastic properties of metamaterials based on triply periodic minimal surfaces
- Year: 2024
- Volume: 52
- Issue: 2
- 20
- 109
- Pages: 11-29
Influence of glass fibers on the physico-mechanical and performance properties of rubber based on general and special purpose caoutchoucs
- Year: 2024
- Volume: 52
- Issue: 1
- 14
- 386
- Pages: 126-131
Role of heat treatment on mechanical and wear characteristics of Al-TiC composites
- Year: 2024
- Volume: 52
- Issue: 1
- 23
- 387
- Pages: 108-117
Influence of various friction stir processing (FSP) schemes on the microstructure and properties of AD31 aluminium alloy busbar
А.Е. Medvedev
Atroshchenko V.V.
Selivanov A.S.
Bogdanov A.R.
Gorbatkov M.V.
Logachev Y.V.
Lobachev V.S.
- Year: 2024
- Volume: 52
- Issue: 1
- 12
- 443
- Pages: 95-107
Microstructure, mechanical properties and heat resistance of AL30 piston alloy produced via electromagnetic casting
- Year: 2024
- Volume: 52
- Issue: 1
- 27
- 430
- Pages: 81-94
Numerical estimation of fatigue life of aluminum alloy specimen with surface defects based on stress-life approach
- Year: 2024
- Volume: 52
- Issue: 1
- 17
- 493
- Pages: 69-80
Green's function molecular dynamics method for contact mechanics with a viscoelastic layer
- Year: 2024
- Volume: 52
- Issue: 1
- 10
- 380
- Pages: 60-68
Evaluation of mechanical properties of ABS-based fiber composite with infill using 3D printing technology
- Year: 2023
- Volume: 51
- Issue: 7
- 26
- 440
- Pages: 99-106
Elastic properties of additively produced metamaterials based on lattice structures
- Year: 2023
- Volume: 51
- Issue: 7
- 34
- 481
- Pages: 42-62
Toughening of nanocrystalline alloys due to grain boundary segregations: finite element modeling
- Year: 2023
- Volume: 51
- Issue: 7
- 30
- 414
- Pages: 34-41
Synthesis and characterization of iron-doped TiO2 nanotubes for dye-sensitized solar cells
- Year: 2023
- Volume: 51
- Issue: 7
- 48
- 516
- Pages: 15-21
Study of the influence of dispersed fillers on properties of rubber for gaskets of rail fastening
- Year: 2023
- Volume: 51
- Issue: 6
- 8
- 191
- Pages: 119-126
Effect of curing temperature on surface and subsurface properties of polyurethane elastomer
- Year: 2023
- Volume: 51
- Issue: 6
- 13
- 168
- Pages: 107-118
Nanomaterials coating for bio-implant applications: a re-analysis
- Year: 2023
- Volume: 51
- Issue: 6
- 14
- 198
- Pages: 92-106
Determination of the formation energy of edge, screw and twinning dislocations in fcc metals using the molecular dynamics
- Year: 2023
- Volume: 51
- Issue: 6
- 9
- 210
- Pages: 84-91
Electronic, magnetic properties and pressure-induced phase transition of new D019 Fe2MnSn Heusler alloy
- Year: 2023
- Volume: 51
- Issue: 6
- 21
- 243
- Pages: 65-75
Effect of industrial hot rolling mode on microstructure and properties of low carbon bainitic steel
- Year: 2023
- Volume: 51
- Issue: 6
- 13
- 207
- Pages: 54-64
Study on nanosized Al2O3 and Al2O3-SiC on mechanical, wear and fracture surface of Al7075 composites for soil anchoring applications
- Year: 2023
- Volume: 51
- Issue: 6
- 13
- 190
- Pages: 24-41
Qualitative and quantitative interdependence of physical and mechanical properties of stir-casted hybrid aluminum composites
- Year: 2023
- Volume: 51
- Issue: 6
- 11
- 174
- Pages: 14-23
A review on the mechanical behaviour of aluminium matrix composites under high strain rate loading
- Year: 2023
- Volume: 51
- Issue: 6
- 23
- 232
- Pages: 1-13
Features of the properties of steel with the trip effect under various types of deformation loading
- Year: 2023
- Volume: 51
- Issue: 5
- 22
- 299
- Pages: 152-164
Surface morphology of InGaAs and InP layers after local Zn diffusion from the vapor phase in the MOCVD reactor
S.A. Blokhin
Levin R.V.
Epoletov V.S.
Kuzmenkov A.G.
A.A. Blokhin
Bobrov M.A.
Kovach Y.N.
Maleev N.A.
Prasolov N.D.
Kulagina M.M.
Guseva Yu.А.
Zadiranov Yu.М.
Nikitina E.V.
Andryushkin V.V.
Vasil’ev A.P.
Voropaev K.O.
- Year: 2023
- Volume: 51
- Issue: 5
- 22
- 352
- Pages: 142-151
Effect of Al addition on the mechanical properties of Zr50Cu50-xAlx (0≤x≤50) bulk metallic glass
- Year: 2023
- Volume: 51
- Issue: 5
- 11
- 254
- Pages: 107-114
Effect of cobalt and tungsten carbide particles inclusions into the aluminium composite on the hardness and wear properties
- Year: 2023
- Volume: 51
- Issue: 5
- 21
- 270
- Pages: 99-106
Prediction of mechanical properties of elastomeric materials using neural networks
- Year: 2023
- Volume: 51
- Issue: 5
- 13
- 249
- Pages: 66-78
On the crack evolutional in human dentin under uniaxial compression imaged by high resolution tomography
- Year: 2023
- Volume: 51
- Issue: 5
- 11
- 236
- Pages: 38-51
Influence of material anisotropy on the interaction between cracks under tension and shear
- Year: 2023
- Volume: 51
- Issue: 5
- 19
- 250
- Pages: 24-37
Molecular dynamics study of the dissolution of titanium nanoparticles in aluminum
- Year: 2023
- Volume: 51
- Issue: 5
- 25
- 313
- Pages: 9-15
The influence of the altered structure zone characteristics after the material jet treatment on the samples stress state during tensility
- Year: 2023
- Volume: 51
- Issue: 4
- 12
- 347
- Pages: 130-141
Structural and mechanical relaxation on annealing in glass-metal layered composites
- Year: 2023
- Volume: 51
- Issue: 4
- 17
- 371
- Pages: 118-129
Laser induced modification of nickel surface for non-enzymatic glucose detection
- Year: 2023
- Volume: 51
- Issue: 4
- 9
- 345
- Pages: 107-117
The effect of ZnO cupping layer on the formation of sol-gel synthesized Ag nanoparticles
- Year: 2023
- Volume: 51
- Issue: 4
- 30
- 419
- Pages: 76-84
Study of burnishining effect on the thermal spray coatings
- Year: 2023
- Volume: 51
- Issue: 4
- 13
- 357
- Pages: 50-65
The influence of friction stir processing on the microstructure and properties of the AD31T alloy
Medvedev A.E.
Atroshchenko V.V.
Selivanov A.S.
Bogdanov A.R.
Gorbatkov M.V.
Logachev Y.V.
Lobachev V.S.
Sadrislamov A.R.
- Year: 2023
- Volume: 51
- Issue: 4
- 13
- 355
- Pages: 38-49
Optimization of wear behaviour of hybrid Al(6061)-Al2O3-B4C composites through hybrid optimization method
- Year: 2023
- Volume: 51
- Issue: 4
- 23
- 354
- Pages: 23-37
Study of the microstructure effect of SPD-treated titanium on microhardness and corrosion resistance in physiological environments for implantology purposes
E.G. Zemtsova
Petrov A.A.
Kirichenko S.O.
N.F. Morozov
Kudymov V.K.
A.Yu. Arbenin
B.N. Semenov
V.M. Smirnov
- Year: 2023
- Volume: 51
- Issue: 4
- 48
- 454
- Pages: 1-10
Modeling of delamination process coupling contact, friction, and adhesion considering the thermal effect
- Year: 2023
- Volume: 51
- Issue: 3
- 25
- 354
- Pages: 146-166
Effect of tilt angle for conical pin tool with a conical shoulder on heat transfer and material flow using numerical simulation in friction stir welding
- Year: 2023
- Volume: 51
- Issue: 3
- 10
- 207
- Pages: 126-145
Influences of multi-walled carbon nanotubes incorporated into poly(methyl methacrylate-co-acrylic acid)/polyethylene glycol
- Year: 2023
- Volume: 51
- Issue: 3
- 6
- 210
- Pages: 66-74
Reproducibility of properties of AsxSe1-x glasses on the synthesis temperature
- Year: 2023
- Volume: 51
- Issue: 3
- 12
- 245
- Pages: 59-65
Microstructural characterization of SiC reinforced Ti−6Al−4V metal matrix composites fabricated through powder metallurgy route
- Year: 2023
- Volume: 51
- Issue: 3
- 31
- 247
- Pages: 29-37
Development of aluminum-based composite with two reinforcing modifiers (TiC/Ni, CNTs/Ni) with improved mechanical properties
- Year: 2023
- Volume: 51
- Issue: 3
- 15
- 274
- Pages: 9-19
Crack bridging in ceramic-based nanocomposites reinforced with hybrid graphene/alumina nanofibers
- Year: 2023
- Volume: 51
- Issue: 3
- 23
- 266
- Pages: 1-8
Finite-strain elastic-plastic torsion: comparison of von Mises and Tresca materials
- Year: 2023
- Volume: 51
- Issue: 2
- 21
- 596
- Pages: 140-150
Study on microstructure, tensile, wear, and fracture behavior of A357 by modifying strontium (Sr) and calcium (Ca) content
- Year: 2023
- Volume: 51
- Issue: 2
- 26
- 657
- Pages: 128-139
Exact elastoplastic analysis of a rotating hollow cylinder made of power-law hardening material
- Year: 2023
- Volume: 51
- Issue: 2
- 20
- 585
- Pages: 96-111
Effect of surface roughness on the fatigue strength of E-glass composite single lap joint bonded with modified graphene oxide-epoxy adhesive
- Year: 2023
- Volume: 51
- Issue: 2
- 22
- 683
- Pages: 65-80
Spectra of crystal curvature in terms of EBSD data to assess martensite fraction in bainitic steel
- Year: 2023
- Volume: 51
- Issue: 2
- 19
- 761
- Pages: 50-57
The finite element analysis of crack tolerance in composite ceramics
- Year: 2023
- Volume: 51
- Issue: 2
- 75
- 743
- Pages: 21-26
Influence of rare earth elements on aluminium metal matrix composites: A review
- Year: 2023
- Volume: 51
- Issue: 2
- 99
- 750
- Pages: 1-20
Mechanical properties of a soil improved with recycled demolition concrete for the construction of shallow foundations
- Year: 2023
- Volume: 51
- Issue: 1
- 63
- 827
- Pages: 168-178
Simulation of the plastic deformation of shape memory alloys considering shear anisotropy on the slip plane
- Year: 2023
- Volume: 51
- Issue: 1
- 38
- 609
- Pages: 61-67
Effect of nickel incorporation on structural and optical properties of zinc oxide thin films deposited by RF/DC sputtering technique
- Year: 2023
- Volume: 51
- Issue: 1
- 40
- 660
- Pages: 19-32
Impact of forced cooling of the joint zone and thermal effect on the distribution values of residual stress generated by arc welding
- Year: 2022
- Volume: 50
- Issue: 3
- 28
- 602
- Pages: 509-517
Anisotropic mechanical properties of elastomeric nanocomposites filled by carbon black, few-layer graphene, and carbon nanotubes
O.K. Garishin
Alexander L. Svistkov
Voznyakovskii A.P.
Tchypkina I.M.
Neverovskaya A.Yu.
V.V. Shadrin
- Year: 2022
- Volume: 50
- Issue: 3
- 36
- 606
- Pages: 495-508
Corrosion cracking of low alloy steels. Testing methods
- Year: 2022
- Volume: 50
- Issue: 3
- 28
- 589
- Pages: 459-474
Heat transfer in infinite one-dimensional crystal considering the third coordination sphere
- Year: 2022
- Volume: 50
- Issue: 3
- 77
- 629
- Pages: 365-372
Finite element algorithm for implementing variants of physically nonlinear defining equations in the calculation of an ellipsoidal shell
- Year: 2022
- Volume: 50
- Issue: 2
- 8
- 546
- Pages: 319-330
Macroscopic quantum effects of electromagnetic induction in silicon nanostructures
- Year: 2022
- Volume: 50
- Issue: 2
- 8
- 513
- Pages: 252-265
Adaptive multiple synchronization and rotors phase shift tracking for two-rotor vibration machine
- Year: 2022
- Volume: 50
- Issue: 2
- 14
- 578
- Pages: 216-225
Hybrid optimization approach on electrical discharge machining process for hybrid Al-Al2O3/B4C composites
- Year: 2022
- Volume: 50
- Issue: 2
- 30
- 617
- Pages: 200-215
Strengthening of nanocrystalline alloys by grain boundary segregations
- Year: 2022
- Volume: 50
- Issue: 2
- 24
- 727
- Pages: 193-199
Numerical simulation of low-velocity impact test on PALF/Epoxy bio-composite laminates
- Year: 2022
- Volume: 50
- Issue: 1
- 45
- 834
- Pages: 126-140
Microstructural modeling and prediction of effective elastic properties in 3D reinforced composite material
- Year: 2022
- Volume: 50
- Issue: 1
- 42
- 854
- Pages: 89-106
Numerical study of thin UHPC targets response against ballistic impact
- Year: 2022
- Volume: 50
- Issue: 1
- 45
- 880
- Pages: 74-88
Physicochemical and mechanical properties of briquettes prepared from the combination of micrometer-sized areca nutshell, tofu dreg, and citronella: from the literature review to experiments
- Year: 2022
- Volume: 50
- Issue: 1
- 35
- 790
- Pages: 20-36
Modelling of composite materials with thermoplastic matrices, carbon fibres, and nanoparticles
- Year: 2022
- Volume: 49
- Issue: 1
- 54
- 695
- Pages: 182-192
Influence of temperature and load on mechanical properties of unirradiated and irradiated plexiglass
- Year: 2022
- Volume: 49
- Issue: 1
- 19
- 687
- Pages: 153-159
First-principles study of anisotropic thermal conductivity of GaN, AlN, and Al0.5Ga0.5N
- Year: 2022
- Volume: 49
- Issue: 1
- 43
- 758
- Pages: 97-107
Magnetic properties of low-dimensional MAX3 (M=Cr, A=Ge, Si and X=S, Se, Te) systems
- Year: 2022
- Volume: 49
- Issue: 1
- 41
- 685
- Pages: 73-84
Maxwell electrodynamics in media, geometry effect on constitutive relations
- Year: 2022
- Volume: 49
- Issue: 1
- 48
- 752
- Pages: 1-16
Influence of Ni-Al interphase boundary orientation on the interdiffusion rate at temperatures above aluminum melting point: a molecular dynamics study
- Year: 2022
- Volume: 48
- Issue: 3
- 30
- 691
- Pages: 452-458
Ab initio calculations of electronic band structure of ideal and defective CdMnS
- Year: 2022
- Volume: 48
- Issue: 3
- 19
- 687
- Pages: 419-427
Deformation and mechanical stresses in a magnet with thin-walled quasi-force-free winding
- Year: 2022
- Volume: 48
- Issue: 3
- 34
- 692
- Pages: 355-366
Comparison of mechanical strain measurement accuracy of fiber-optic sensor and smart-layer
- Year: 2022
- Volume: 48
- Issue: 3
- 40
- 744
- Pages: 342-354
A study on mechanical and dielectric properties of B4C and Al dispersed single-layered epoxy-based polymer composites fabricated through molding and curing route
- Year: 2022
- Volume: 48
- Issue: 3
- 46
- 673
- Pages: 328-341
Non-equilibrium phonon gas in a chalcogenide semiconductor with exponential temperature dependence of conductivity
- Year: 2022
- Volume: 48
- Issue: 3
- 44
- 673
- Pages: 308-314
Study of polylactide 3D-printed samples with double-layer weave
- Year: 2022
- Volume: 48
- Issue: 2
- 25
- 613
- Pages: 289-299
Mechanical properties of marble dust reinforced aluminum matrix structural composites fabricated by stir casting process
- Year: 2022
- Volume: 48
- Issue: 2
- 38
- 699
- Pages: 282-288
Failure analysis of semi-ellıptical crack behavior in the cement mantle of a total hip prosthesis
- Year: 2022
- Volume: 48
- Issue: 2
- 33
- 662
- Pages: 242-271
Analysis of CuCrZr/316L(N) bimetallic joint with and without nickel interlayer for plasma-facing components
Piskarev P.
Gervash A.
Bobrov S.
Ruzanov V.
Ogurski A.
Mazul I.
Giniyatulin R.
Ermakov B.
Sevryukov O.
- Year: 2022
- Volume: 48
- Issue: 2
- 23
- 627
- Pages: 184-198
Study of the influence of structural heritage and operating conditions on the durability of safety valve springs from steel 50KHFA
- Year: 2022
- Volume: 48
- Issue: 2
- 39
- 715
- Pages: 161-174
The intermetallic compounds formation and mechanical properties of composites in the Ni-Al system
- Year: 2022
- Volume: 48
- Issue: 1
- 58
- 854
- Pages: 136-146
Experimental Substantiation of The Possibility of Hydrolytic Lignin Using in the Architectural Electromagnetic Shielding Systems
- Year: 2022
- Volume: 48
- Issue: 1
- 16
- 575
- Pages: 124-135
Microstructure characterization of weld consumable condition on residual stress, flexural strength, and room temperature tensile tests of P92 steel
- Year: 2022
- Volume: 48
- Issue: 1
- 24
- 866
- Pages: 69-90
Epoxy-polyester coatings with additives of PTFE particles and nanoparticles of SiO2
- Year: 2022
- Volume: 48
- Issue: 1
- 38
- 798
- Pages: 20-29
Influence of fiber length, weight percentage on water hyacinth polymer composite material properties – aquatic waste into commercial applications
- Year: 2022
- Volume: 48
- Issue: 1
- 27
- 792
- Pages: 9-19
Combined effects of viscous dissipation and Brownian motion on temperature distribution and heat transfer of Al2O3/water nanofluid flow through a porous medium
- Year: 2021
- Volume: 47
- Issue: 6
- 45
- 811
- Pages: 921-936
Study of mechanical properties of copper slag reinforced particulate polymer composite
- Year: 2021
- Volume: 47
- Issue: 6
- 39
- 831
- Pages: 896-904
Effect of the distance between cathode and substrate on structural and optical properties of zinc oxide thin films deposited by RF sputtering technique
- Year: 2021
- Volume: 47
- Issue: 6
- 34
- 1515
- Pages: 872-884
The evolution of brake friction materials: a review
- Year: 2021
- Volume: 47
- Issue: 5
- 110
- 1238
- Pages: 796-815
Investigation of the surface roughness of aluminium composite in the drilling process
- Year: 2021
- Volume: 47
- Issue: 5
- 33
- 897
- Pages: 739-746
Experimental study and modeling of changing mechanical properties in tempering of bainitic-martensitic steels
- Year: 2021
- Volume: 47
- Issue: 5
- 17
- 1296
- Pages: 727-738
Post-dynamic recrystallization in a heavily alloyed Ni-based superalloy
- Year: 2021
- Volume: 47
- Issue: 5
- 65
- 808
- Pages: 665-675
Detection of a new method for corrosion defects in turbine impeller blades by non-destructive testing
- Year: 2021
- Volume: 47
- Issue: 4
- 38
- 729
- Pages: 657-664
Thermo-mechanical behavior of the bead weld of high-density polyethylene (HDPE) pipes
- Year: 2021
- Volume: 47
- Issue: 4
- 33
- 839
- Pages: 621-632
A model for annealing-induced hardening in ultrafine-grained metals
- Year: 2021
- Volume: 47
- Issue: 4
- 28
- 767
- Pages: 608-612
Effect of Ti reinforcement on the wear behaviour of AZ91/Ti composites fabricated by powder metallurgy
- Year: 2021
- Volume: 47
- Issue: 4
- 34
- 1476
- Pages: 600-607
Study of solid state joints of copper processed by ultrasonic welding
- Year: 2021
- Volume: 47
- Issue: 4
- 48
- 1131
- Pages: 569-576
Structural and magnetic properties of zinc doped nickel ferrite Ni(1−X)ZnXFe2O4 synthesized using sol-gel auto-combustion and hydrothermal methods
- Year: 2021
- Volume: 47
- Issue: 3
- 36
- 890
- Pages: 493-500
An investigation on the growth of fatigue crack between sequentially cold expanded adjacent circular holes in Al 7075 - T651 alloy
- Year: 2021
- Volume: 47
- Issue: 3
- 33
- 1382
- Pages: 475-482
Effect of Ni on the dielectric behavior and microwave absorption performance of ZnO composites.
- Year: 2021
- Volume: 47
- Issue: 3
- 41
- 1536
- Pages: 416-422
Influence of Mg and Cu on the dynamic yield stress of aluminium alloys
- Year: 2021
- Volume: 47
- Issue: 3
- 40
- 804
- Pages: 408-415
The nature of dc conductivity and structural features of glasses of the Ag – As – Se system as materials for photonics and integral optics
- Year: 2021
- Volume: 47
- Issue: 2
- 18
- 1395
- Pages: 344-358
Influence of the size of turmeric microparticles reinforcing agent on mechanical and biodegradation properties of cornstarch-based bioplastic material: current studies, experimental results, and proposal material crack phenomena during mechanical t
- Year: 2021
- Volume: 47
- Issue: 2
- 47
- 981
- Pages: 266-284
Some theorems and wave propagation in a piezothermoelastic medium with two-temperature and fractional order derivative
- Year: 2021
- Volume: 47
- Issue: 2
- 20
- 1373
- Pages: 196-218
Acoustic sensing study of the physical and mechanical properties of titanium alloy Ti-6Al-4V, made by selective laser melting
- Year: 2021
- Volume: 47
- Issue: 1
- 63
- 1382
- Pages: 139-158
Impacts of couple stress on S-waves in a pre-stressed anisotropic sandy medium
- Year: 2021
- Volume: 47
- Issue: 1
- 36
- 1165
- Pages: 131-138
Development and study of multilayer electromagnetic radiation shields based on powdered oxide-containing materials
- Year: 2021
- Volume: 47
- Issue: 1
- 25
- 1191
- Pages: 123-130
Asymptotical regimes of the hydrofracturing planar 3D model
- Year: 2021
- Volume: 47
- Issue: 1
- 19
- 969
- Pages: 89-102
Distribution of plastic deformation along the perimeter of circular specimen of thin-wall fuel-element cladding during its expansion
- Year: 2021
- Volume: 47
- Issue: 1
- 30
- 1044
- Pages: 74-88
Mechanical properties of AlSiMg/SiC and AlSiMgTiB/SiC produced by semi-solid stir casting and high pressure die casting
- Year: 2021
- Volume: 47
- Issue: 1
- 54
- 1163
- Pages: 31-39
Analytical description of quantum effects at current filamentation in chalcogenide glasses
- Year: 2020
- Volume: 46
- Issue: 1
- 12
- 782
- Pages: 202-206
Material behaviour during a complex stress test of thin-walled, cylindrical single-crystal specimens
- Year: 2020
- Volume: 46
- Issue: 1
- 19
- 967
- Pages: 182-190
Quasi static and flexural mechanical property evaluation of basalt/flax reinforced composites
K. Arun Prasath
V. Arumugaprabu
P. Amuthakkannan
K. Naresh
M.S. Muthugopal
M. Jeganathan
R. Pragadeesh
- Year: 2020
- Volume: 46
- Issue: 1
- 14
- 1027
- Pages: 132-138
The influence of turmeric microparticles amount on the mechanical and biodegradation properties of cornstarch-based bioplastic material: from bioplastic literature review to experiments
- Year: 2020
- Volume: 46
- Issue: 1
- 53
- 1347
- Pages: 99-114
Algorithm for positioning of rotary actuators based on shape memory Cu-Al-Ni tensile force elements
- Year: 2020
- Volume: 46
- Issue: 1
- 16
- 914
- Pages: 50-56
Burst-like shape memory recovery and calorimetric effect in Cu-Al-Ni alloy single crystals at cyclic test
- Year: 2020
- Volume: 46
- Issue: 1
- 39
- 1070
- Pages: 42-49
Thermomechanical interactions due to time harmonic sources in a transversely isotropic magneto thermoelastic rotating solids in Lord-Shulman model
- Year: 2020
- Volume: 46
- Issue: 1
- 28
- 1056
- Pages: 7-26
Spinor Maxwell equations in Riemannian space-time and the geometrical modeling of constitutive relations in electrodynamics
- Year: 2020
- Volume: 45
- Issue: 1
- 11
- 1019
- Pages: 104-131
3D finite element, connected with orthogonal finite functions, in modeling and investigation of elastic homogeneous and heterogeneous materials
- Year: 2020
- Volume: 45
- Issue: 1
- 16
- 980
- Pages: 31-37
Modeling microstructure evolution during thermomechanical processing and heat treatment of steels and predicting their mechanical properties
- Year: 2020
- Volume: 45
- Issue: 1
- 29
- 992
- Pages: 8-19
Finite element homogenization of piezocomposites with isolated inclusions using improved 3-0 algorithm for generating representative volumes in ACELAN-COMPOS package
- Year: 2020
- Volume: 44
- Issue: 3
- 17
- 1132
- Pages: 392-403
Experimental study and modeling of pre-deformation effect on austenite to ferrite transformation
- Year: 2020
- Volume: 44
- Issue: 3
- 24
- 1114
- Pages: 366-379
Modeling of static recrystallization in complexly alloyed austenite
- Year: 2020
- Volume: 44
- Issue: 3
- 20
- 1045
- Pages: 348-365
Structural behavior of FG-CNT cylindrical panel: influence of non-uniform temperature field
- Year: 2020
- Volume: 44
- Issue: 3
- 14
- 959
- Pages: 332-347
Control of (Al,Ga)P composition in self-catalyzed nanowire growth
- Year: 2020
- Volume: 44
- Issue: 3
- 30
- 1056
- Pages: 316-323
An approximate analytical solution for hydraulic fracture opening under non-uniform internal pressure
- Year: 2020
- Volume: 44
- Issue: 3
- 29
- 1082
- Pages: 288-305
Damage and fracture of viscous-plastic compressible materials
- Year: 2020
- Volume: 44
- Issue: 2
- 10
- 1154
- Pages: 250-255
Temperature effect on the process of wear of a fibrous composite under high load conditions
- Year: 2020
- Volume: 44
- Issue: 2
- 16
- 1120
- Pages: 229-237
Growth of thick gallium oxide on the various substrates by halide vapor phase epitaxy
A.V. Kremleva
Sh.Sh. Sharofidinov
A.M. Smirnov
E. Podlesnov
M.V. Dorogov
M.A. Odnoblyudov
V.E. Bougrov
A.E. Romanov
- Year: 2020
- Volume: 44
- Issue: 2
- 57
- 1667
- Pages: 164-171
Crystallographic orientation, delay time and mechanical constants influence on thermal fatigue strength of single - crystal nickel superalloys
- Year: 2020
- Volume: 44
- Issue: 1
- 13
- 1212
- Pages: 125-136
Structure and properties of nanoporous oxide dielectrics modified by carbon
- Year: 2020
- Volume: 44
- Issue: 1
- 9
- 1028
- Pages: 110-115
Numerical optimization of the cantilever piezoelectric generator
- Year: 2020
- Volume: 44
- Issue: 1
- 23
- 1324
- Pages: 94-102
Structural transformation of HCP metallic nanowireusing cleri-rosato potential
- Year: 2020
- Volume: 44
- Issue: 1
- 7
- 1178
- Pages: 83-93
Hybrid acoustic panel: the effect of fiber volume fraction and panel thickness
- Year: 2020
- Volume: 44
- Issue: 1
- 6
- 1112
- Pages: 77-82
Strain-hardening effect on critical strain assessment of pipe plastic bending at buckling
- Year: 2020
- Volume: 44
- Issue: 1
- 8
- 1094
- Pages: 48-60
Probing of polycrystalline magnesium at ultrasonic frequencies by mechanical spectroscopy
- Year: 2020
- Volume: 44
- Issue: 1
- 14
- 1261
- Pages: 19-25
Two scale homogenization in ternary locally resonant metamaterials
- Year: 2020
- Volume: 44
- Issue: 1
- 32
- 1178
- Pages: 8-18
Corrosion resistance and mechanical performance of steel reinforcement, before and after shot-blasting process
- Year: 2020
- Volume: 43
- Issue: 1
- 11
- 1337
- Pages: 59-64
Physical fundamentals of thermomechanical processing in ultrafine-grained metallic materials manufacturing
- Year: 2020
- Volume: 43
- Issue: 1
- 18
- 1261
- Pages: 50-58
Analysis of the degree isotropic deformation, strength and structure steel samples after severe deformation by shifting
- Year: 2020
- Volume: 43
- Issue: 1
- 16
- 1164
- Pages: 44-49
Asymptotics of a thermal wave in one-dimensional harmonic crystal
- Year: 2019
- Volume: 42
- Issue: 6
- 5
- 1037
- Pages: 837-845
Prediction of radiation shielding properties of self adhesive elastic coating
- Year: 2019
- Volume: 42
- Issue: 6
- 18
- 1079
- Pages: 825-836
Structural characterization of bulk (AlXGa1-X)2O3 crystals grown by the ózochralski method
- Year: 2019
- Volume: 42
- Issue: 6
- 10
- 1492
- Pages: 797-801
The strengthening and the electrical resistivity of thermo-mechanical deformation processed Cu-Nb composite wires
- Year: 2019
- Volume: 42
- Issue: 6
- 10
- 1033
- Pages: 731-741
The impact of high heating rates on the austenitization process of 18NiCrMo5 steel
- Year: 2019
- Volume: 42
- Issue: 6
- 13
- 1065
- Pages: 717-730
A numerical study of ballistic behaviour of ceramic metallic bi-layer armor under impact load
- Year: 2019
- Volume: 42
- Issue: 6
- 29
- 1404
- Pages: 699-710
Shear anisotropy in Si-Cu interfaces on the atomic scale
- Year: 2019
- Volume: 42
- Issue: 5
- 13
- 1137
- Pages: 646-655
Pantographic metamaterials: a view towards applications
Francesco dell'Isola
Ivan Giorgio
Luca Placidi
Mario Spagnuolo
Patrice Peyre
Corinne Dupuy
Justin Dirrenberger
Marek Pawlikowski
L.A. Igumnov
- Year: 2019
- Volume: 42
- Issue: 5
- 18
- 1089
- Pages: 637-645
Combined effect of boron alloying and ausforming on austenite transformation in low carbon steels under continuous cooling
- Year: 2019
- Volume: 42
- Issue: 5
- 10
- 1170
- Pages: 609-616
Nonlinear dynamics of serrated deformation of metals at low temperatures
- Year: 2019
- Volume: 42
- Issue: 5
- 9
- 1027
- Pages: 602-608
On a configurational force driving surface growth of solids
- Year: 2019
- Volume: 42
- Issue: 5
- 13
- 1256
- Pages: 582-595
Modeling of elastoplastic deformation of structural steel by a trajectory containing three circles touching internally
- Year: 2019
- Volume: 42
- Issue: 5
- 5
- 1113
- Pages: 528-534
Ultrasonic inspection of anisotropic laminate plates immersed in acoustic medium
- Year: 2019
- Volume: 42
- Issue: 5
- 10
- 1285
- Pages: 491-501
Stress relaxation and creep of a composite material based on epoxy resin filled with the hemp boon
- Year: 2019
- Volume: 42
- Issue: 4
- 53
- 1615
- Pages: 484-490
Employment of Eulerian, Lagrangian, and arbitrary Lagrangian-Eulerian description for crack opening problem
- Year: 2019
- Volume: 42
- Issue: 4
- 15
- 1186
- Pages: 470-483
A static boundary element analysis of 3D anisotropic elastic problems
- Year: 2019
- Volume: 42
- Issue: 4
- 5
- 1086
- Pages: 461-469
Mechanical studies of rubber micro- and nanocomposites promising for the tire industry. Uniaxial and biaxial tests
- Year: 2019
- Volume: 42
- Issue: 4
- 18
- 1220
- Pages: 445-454
Investigation and modeling the austenitization kinetics of steels with complex microstructure under continuous heating
- Year: 2019
- Volume: 42
- Issue: 4
- 8
- 1108
- Pages: 423-435
The influence of stress triaxiality on ductility of α titanium alloy in a wide range of strain rates
- Year: 2019
- Volume: 42
- Issue: 4
- 33
- 1347
- Pages: 415-422
Rotary actuator control based on tensile force elements made of shape memory Cu-Al-Ni crystals when operated in a cyclic mode
- Year: 2019
- Volume: 42
- Issue: 4
- 13
- 1074
- Pages: 407-414
Interatomic potentials for describing impurity atoms of light elements in fcc metals
- Year: 2019
- Volume: 42
- Issue: 4
- 27
- 1306
- Pages: 380-388
Modeling plastic deformation and damage accumulation processes in structural steels under block non-symmetric low-cycle loading
- Year: 2019
- Volume: 42
- Issue: 3
- 4
- 1188
- Pages: 359-366
Finite element modeling and investigation of elastic homogeneous and heterogeneous materials
- Year: 2019
- Volume: 42
- Issue: 3
- 7
- 1095
- Pages: 340-350
Supercomputing analysis of fan-shaped waves in the Earth's crust at the depth of seismic activity
- Year: 2019
- Volume: 42
- Issue: 3
- 6
- 1112
- Pages: 330-339
Identification of micro-mechanical characteristics of monoclinic tungsten trioxide microparticles by nanoindentation technique
- Year: 2019
- Volume: 42
- Issue: 3
- 1
- 1111
- Pages: 323-329
Numerical method of single-crystal turbine blade static strength estimation taking into account plasticity and creep effects
- Year: 2019
- Volume: 42
- Issue: 3
- 13
- 1110
- Pages: 311-322
Coupled thermo-electro-mechanical modeling of thermal fatigue of single-crystal corset samples
- Year: 2019
- Volume: 42
- Issue: 3
- 3
- 1055
- Pages: 296-310
Study of heat dissipating material using boron nitride fabricated by laser ablation
- Year: 2019
- Volume: 42
- Issue: 3
- 13
- 1128
- Pages: 272-279
Boundary element time-harmonic analysis of 3D linear piezoelectric solids
- Year: 2019
- Volume: 42
- Issue: 2
- 13
- 1137
- Pages: 256-264
Applied theory for electro-elastic plates with non-homogeneous polarization
- Year: 2019
- Volume: 42
- Issue: 2
- 8
- 1090
- Pages: 242-255
The structural transformation and mechanical strength OF Ni, Ti nanowires and Nitinol alloys at various vacancy rates: molecular dynamic study using Cleri-Rosato potential
- Year: 2019
- Volume: 42
- Issue: 2
- 10
- 1057
- Pages: 211-223
Mechanism of molecule migration of carbon and silicon monoxides in silicon carbide crystal
- Year: 2019
- Volume: 42
- Issue: 2
- 8
- 1292
- Pages: 178-182
Influences of solvent types on the formation of graphene in the electrochemical exfoliation method
- Year: 2019
- Volume: 42
- Issue: 1
- 20
- 1210
- Pages: 151-157
Preparation and physico-chemical properties of gracilaria/PVA/GA/CNT-based hydrogel for slow/controlled release material
- Year: 2019
- Volume: 42
- Issue: 1
- 5
- 1143
- Pages: 141-150
First principle electronic, magnetic and thermodynamic characterization of heavy fermion ternary rare earth metal alloys
- Year: 2019
- Volume: 42
- Issue: 1
- 11
- 993
- Pages: 112-130
Mathematical 3D models of irreversible polarization processes of a ferroelectrics and ferroelastics polycrystal
- Year: 2019
- Volume: 42
- Issue: 1
- 2
- 1125
- Pages: 74-102
Applied theory of bending vibrations of a piezoelectric bimorph with a quadratic electric potential distribution
- Year: 2019
- Volume: 42
- Issue: 1
- 13
- 1252
- Pages: 65-73
The influence of an adhesive layer on the interaction between a piezo-actuator and an elastic 3D-layer and on the excited wave fields
- Year: 2019
- Volume: 42
- Issue: 1
- 9
- 1218
- Pages: 40-53
Finite element modelling of ceramomatrix piezocomposites by using effective moduli method with different variants of boundary conditions
- Year: 2019
- Volume: 42
- Issue: 1
- 5
- 1118
- Pages: 1-13
Added mass study of plane structures at their various motions
- Year: 2019
- Volume: 41
- Issue: 1
- 11
- 1176
- Pages: 116-124
Skew Brownian motion with dry friction: Pugachev−Sveshnikov approach
- Year: 2019
- Volume: 41
- Issue: 1
- 12
- 1101
- Pages: 103-110
Use of X-ray analysis for conducting input and process control of electronics materials
- Year: 2019
- Volume: 41
- Issue: 1
- 5
- 960
- Pages: 84-87
Effect of anodic voltage on parameters of porous alumina formed in sulfuric acid electrolytes
X. Huang
W. Su
L. Sun
J. Liu
D.A. Sasinovich
O.V. Kupreeva
D.A. Tsirkunov
G.G. Rabatuev
S.K. Lazarouk
- Year: 2019
- Volume: 41
- Issue: 1
- 8
- 1108
- Pages: 62-68
Study of thermionic-tunnel component contribution in heterostructures of InGaAs/GaAs with a single quantum well by admittance methods
- Year: 2019
- Volume: 41
- Issue: 1
- 4
- 1124
- Pages: 30-35
Leakage current in AlGaN Schottky diode in terms of the phonon-assisted tunneling model
- Year: 2019
- Volume: 41
- Issue: 1
- 11
- 1163
- Pages: 19-29
Mechanical impulse enhancement in a microsystem based on nanoporous silicon combustion
- Year: 2019
- Volume: 41
- Issue: 1
- 7
- 1039
- Pages: 8-14
Biophysical analysis of microtubules nonlocal beam theory
- Year: 2018
- Volume: 40
- Issue: 2
- 4
- 1009
- Pages: 304-312
Theoretical and experimental study of plastic anisotropy of Al-1Mn alloy taking into account the crystallographic orientation of the structure
- Year: 2018
- Volume: 40
- Issue: 2
- 3
- 1077
- Pages: 274-284
Indentation of an elastic half-space reinforced with a functionally graded interlayer by a conical punch
- Year: 2018
- Volume: 40
- Issue: 2
- 9
- 1007
- Pages: 254-260
Multiblock copoly(urethane-amide-imide)s with the properties of thermoplastic elastomers
I.A. Kobykhno
D.A. Kuznetсov
A.L. Didenko
V.E. Smirnova
Vaganov G.V.
A.G. Ivanov
E.N. Popova
L.S. Litvinova
V.M. Svetlichnyi
E.S. Vasilyeva
Oleg V. Tolochko
V.E. Yudin
V.V. Kudryavtsev
- Year: 2018
- Volume: 40
- Issue: 2
- 18
- 1195
- Pages: 221-230
Modern approaches for study of eutectoid steel oxidation and decarburization
- Year: 2018
- Volume: 40
- Issue: 2
- 3
- 991
- Pages: 212-220
Comparison of influence forging and extrusion on microstructure of heusler alloys
I.I. Musabirov
I.M. Safarov
R.M. Galeyev
D.R. Abdullina
R.Y. Gaifullin
D.D. Afonichev
V.V. Koledov
R.R. Mulyukov
- Year: 2018
- Volume: 40
- Issue: 2
- 4
- 1061
- Pages: 201-211
Higher-order model of prestressed isotropic medium for large initial deformations
- Year: 2018
- Volume: 40
- Issue: 2
- 5
- 1071
- Pages: 187-200
Anomalous heat transfer in one-dimensional diatomic harmonic crystal
- Year: 2018
- Volume: 40
- Issue: 2
- 3
- 1142
- Pages: 172-180
Theory of hyperbolic two-temperature generalized thermoelasticity
- Year: 2018
- Volume: 40
- Issue: 2
- 21
- 1220
- Pages: 158-171
Increasing the reliability the combined criteria of the static strength of a material of complexly loaded deformable structures
- Year: 2018
- Volume: 40
- Issue: 1
- 8
- 1055
- Pages: 124-132
Ab initio calculations of structural and thermal properties of wurtzite Zn1-xCdxO alloys with Debye-Gruneisen model
- Year: 2018
- Volume: 40
- Issue: 1
- 7
- 933
- Pages: 112-116
Relation of the optical properties of boron copper-containing glasses on the concentration of lithium
- Year: 2018
- Volume: 40
- Issue: 1
- 6
- 1166
- Pages: 78-83
Optimization of surface roughness of duplex stainless steel in dry turning operation using Taguchi technique
- Year: 2018
- Volume: 40
- Issue: 1
- 7
- 1036
- Pages: 63-70
Micro and nanoshungites - perspective mineral fillers for rubber composites used in the tires
- Year: 2018
- Volume: 40
- Issue: 1
- 14
- 1079
- Pages: 56-62
Numerical analysis of effective properties of heterogeneously polarized porous piezoceramic materials with local alloying pore surfaces
- Year: 2018
- Volume: 40
- Issue: 1
- 4
- 1139
- Pages: 12-21
Recent developments in understanding the creep of aluminum
- Year: 2018
- Volume: 40
- Issue: 1
- 10
- 1104
- Pages: 1-6
Resistance to erosive destruction of steam turbine blades from titanium alloys, their structure and phase composition
- Year: 2018
- Volume: 39
- Issue: 1
- 9
- 1117
- Pages: 128-134
Emission properties of an array of silicon nanocones
- Year: 2018
- Volume: 39
- Issue: 1
- 4
- 999
- Pages: 75-80
Electronic properties of phosphorene with vacancies: ab initio study
- Year: 2018
- Volume: 39
- Issue: 1
- 9
- 1102
- Pages: 35-42
Ab initio simulation of graphene interaction with SiO2 substrate for nanoelectronics application
- Year: 2018
- Volume: 39
- Issue: 1
- 27
- 1280
- Pages: 27-34
Electronic and optic properties of transition metal dichalcogenides (MoS2, WSe2) and graphene heterostructures
- Year: 2018
- Volume: 39
- Issue: 1
- 21
- 1309
- Pages: 8-14
Lattice thermal conductivity of transition metal dichalcogenides
- Year: 2018
- Volume: 39
- Issue: 1
- 14
- 1281
- Pages: 1-7
Carbide forming special features and fracture mechanisms under the austenitic chromium-nickel 304 steel post-life ageing
- Year: 2018
- Volume: 38
- Issue: 1
- 7
- 1055
- Pages: 111-118
On anisotropy of mechanical properties of aluminum alloys under high temperature deformation
- Year: 2018
- Volume: 38
- Issue: 1
- 9
- 1172
- Pages: 69-75
Severe plastic deformation influence on engineering plasticity of Copper
- Year: 2018
- Volume: 38
- Issue: 1
- 12
- 1191
- Pages: 64-68
Microstructure evolution of a Ti/TiB metal-matrix composite during high-temperature deformation
- Year: 2018
- Volume: 38
- Issue: 1
- 16
- 1202
- Pages: 54-63
Contactless electromagnetic acoustic techniques of diagnostics and assessment of mechanical properties of steel rolled bars
- Year: 2018
- Volume: 38
- Issue: 1
- 4
- 965
- Pages: 48-53
Thermomechanical processing Пf steels and alloys physical foundations, resource saving technique and modelling
- Year: 2018
- Volume: 38
- Issue: 1
- 4
- 1244
- Pages: 16-25
Study of bottom ash reinforced aluminum metal matrix composite for automotive parts
- Year: 2018
- Volume: 37
- Issue: 2
- 9
- 834
- Pages: 212-217
Microstructure modelling of bottom ash reinforced aluminum metal matrix composite with stress relaxation
- Year: 2018
- Volume: 37
- Issue: 2
- 8
- 810
- Pages: 198-204
Analysis of oscillation forms at defect identification in node of truss based on finite element modeling
- Year: 2018
- Volume: 37
- Issue: 2
- 5
- 1095
- Pages: 192-197
Analyzing the output characteristics of a double-console PEG based on numerical simulation
- Year: 2018
- Volume: 37
- Issue: 2
- 5
- 1132
- Pages: 168-175
Magnetic field sensor for non-invasive control medical implants
- Year: 2018
- Volume: 37
- Issue: 2
- 4
- 950
- Pages: 146-152
Surface morphology study of gas-sensitive cobalt-containing polyacrylonitrile nanocomposite films
- Year: 2018
- Volume: 37
- Issue: 2
- 4
- 817
- Pages: 118-123
Study of the properties of Cu-containing polyacrylonitrile nanostructured gas-sensing films
- Year: 2018
- Volume: 37
- Issue: 2
- 7
- 854
- Pages: 109-117
The comparative evaluation of precision of classical and numerical solutions of contact problems
- Year: 2018
- Volume: 37
- Issue: 1
- 6
- 951
- Pages: 84-91
A boundary element approach for 3D transient dynamic problems of moderately thick multilayered anisotropic elastic composite plates
- Year: 2018
- Volume: 37
- Issue: 1
- 2
- 974
- Pages: 79-83
Effect of PECVD conditions on mechanical stress of silicon films
- Year: 2018
- Volume: 37
- Issue: 1
- 13
- 1016
- Pages: 67-72
Mathematical and computer homogenization models for bulk mixture composite materials with imperfect interfaces
- Year: 2018
- Volume: 37
- Issue: 1
- 5
- 1081
- Pages: 34-41
Finite element homogenization models of bulk mixed piezocomposites with granular elastic inclusions in ACELAN package
- Year: 2018
- Volume: 37
- Issue: 1
- 11
- 1031
- Pages: 25-33
Models of porous piezocomposites with 3-3 connectivity type in ACELAN finite element package
- Year: 2018
- Volume: 37
- Issue: 1
- 14
- 1030
- Pages: 16-24
Defining relations of mechanics of damaged media effected by fatigue and creep
- Year: 2018
- Volume: 36
- Issue: 1
- 2
- 913
- Pages: 147-153
Stress-strain state in the corner points of a clamped plate under uniformly distributed normal load
- Year: 2018
- Volume: 36
- Issue: 1
- 3
- 894
- Pages: 142-146
Approximate analytical approach in analyzing an orthotropic rectangular plate with a crack
- Year: 2018
- Volume: 36
- Issue: 1
- 7
- 877
- Pages: 137-141
Investigation of the process of deformation and destruction of thin beryllium foils under static loading by external pressure
- Year: 2018
- Volume: 36
- Issue: 1
- 4
- 946
- Pages: 100-113
Electroducing polymer composites based on high density polyethylene and technical-carbon
- Year: 2018
- Volume: 36
- Issue: 1
- 15
- 1139
- Pages: 76-84
Growth of SiC films by the method of substitution of atoms on porous Si (100) and (111) substrates
V.V. Kidalov
S.A. Kukushkin
A.V. Osipov
A.V. Redkov
A.S. Grashchenko
I.P. Soshnikov
M.E. Boiko
M.D. Sharkov
A.F. Dyadenchuk
- Year: 2018
- Volume: 36
- Issue: 1
- 32
- 1408
- Pages: 39-52
The effect of lithium perchlorate on poly (sodium 4-styrenesulfonate): studies based on morphology, structural and electrical conductivity
- Year: 2018
- Volume: 36
- Issue: 1
- 9
- 886
- Pages: 8-17
Applied theory of micropolar elastic thin plates with constrained rotation and the finite element method
- Year: 2018
- Volume: 35
- Issue: 1
- 4
- 993
- Pages: 145-154
Waves in anisotropic thermoelastic medium with phase lag, two-temperature and void
- Year: 2018
- Volume: 35
- Issue: 1
- 1
- 952
- Pages: 126-138
On the numerical solution of a variable-coefficient Burgers equation arising in granular segregation
- Year: 2018
- Volume: 35
- Issue: 1
- 7
- 1113
- Pages: 21-27
Applicability of polymer composite materials in the development of tractor falling-object protective structures (FOPS)
Dmitrii Lebedev
A.P. Okunev
M.V. Aleshin
K.S. Ivanov
O.I. Klyavin
S.P. Nikulina
O.I. Rozhdestvenskiy
A.I. Borovkov
- Year: 2017
- Volume: 34
- Issue: 1
- 5
- 1268
- Pages: 90-96
NVH analysis of offroad vehicle frame. Evaluation of mutual influence of body-frame system components
- Year: 2017
- Volume: 34
- Issue: 1
- 14
- 1228
- Pages: 70-75
Validation of EuroNCAP frontal impact of frame off-road vehicle: road traffic accident simulation
- Year: 2017
- Volume: 34
- Issue: 1
- 9
- 1172
- Pages: 59-69
Design and simulation of additive manufactured structures of three-component composite material
Romashkina (Zobacheva) A.U.
Alexander Nemov
A.I. Borovkov
A.D. Novokshenov
M.V. Khovaiko
N.A. Ermolenko
- Year: 2017
- Volume: 34
- Issue: 1
- 13
- 1366
- Pages: 51-58
Numerical simulation of superplastic roll-forming of a hollow shaft out of nickel-based superalloy
- Year: 2017
- Volume: 33
- Issue: 1
- 17
- 1162
- Pages: 171-177
Microstructure, mechanical properties and thermal stability of the ultrafine grained Al-Mg-Sc-Zr alloy processed by multy-directional isothermal forging
- Year: 2017
- Volume: 33
- Issue: 1
- 27
- 1608
- Pages: 137-151
Plastic deformation of the Ni-Mn-Ga alloy by multiple isothernal forging
- Year: 2017
- Volume: 33
- Issue: 1
- 18
- 1316
- Pages: 124-136
Heat-resistant intermetallic alloys and composites based on titanium: microstructure, mechanical properties and possible application
- Year: 2017
- Volume: 33
- Issue: 1
- 40
- 1520
- Pages: 80-96
Formation of the joint during solid-state bonding of Ni-based superalloys EP975 and EK79
- Year: 2017
- Volume: 33
- Issue: 1
- 25
- 1217
- Pages: 57-68
EBSD analysys of austenite steel microstructure after cryogenic rolling
- Year: 2017
- Volume: 33
- Issue: 1
- 13
- 1381
- Pages: 29-40
Ti2AlNb-based intermetallic alloys and composites
- Year: 2017
- Volume: 33
- Issue: 1
- 14
- 1181
- Pages: 12-18
Finite element modelling of the mitral valve repair using an implantable leaflet plication clip
- Year: 2017
- Volume: 32
- Issue: 3
- 11
- 1017
- Pages: 383-392
Comparison of adaptive algorithms for solving plane problems of classical and cosserat elasticity
- Year: 2017
- Volume: 32
- Issue: 3
- 11
- 921
- Pages: 370-382
Review of the computational approaches to advanced materials simulation in accordance with modern advanced manufacturing trends
- Year: 2017
- Volume: 32
- Issue: 3
- 30
- 1317
- Pages: 328-352
Application of quantum-chemical modeling results in experimental investigations of silicone composites
- Year: 2017
- Volume: 32
- Issue: 3
- 4
- 1067
- Pages: 298-304
Mechanical properties of nanostructured titanium with bioactive titanium-organic nanocoating
- Year: 2017
- Volume: 32
- Issue: 3
- 4
- 1096
- Pages: 253-257
Investigation of the influence of strain induced junction disclinations on hardening and nucleation of cracks during plastic deformation of polycrystals
- Year: 2017
- Volume: 32
- Issue: 3
- 1
- 902
- Pages: 237-242
In-situ measurement and finite element simulation of thermo-mechanical properties of AA 6063 aluminum alloy for MIG weldment
- Year: 2017
- Volume: 32
- Issue: 2
- 17
- 1253
- Pages: 222-236
On calculation of effective elastic properties of materials with cracks
- Year: 2017
- Volume: 32
- Issue: 2
- 5
- 941
- Pages: 213-221
Relaxation in resins with low-frequency mechanical cycling
- Year: 2017
- Volume: 32
- Issue: 2
- 7
- 1092
- Pages: 207-212
Study of antireflection coatings for high speed 1.3 -1.55 µm InGaAs/InP PIN photodetector
E.S. Kolodeznyi
I.I. Novikov
A.G. Gladyshev
S.S. Rochas
K.D. Sharipo
L.Ya. Karachinsky
A.Yu. Egorov
V.E. Bougrov
- Year: 2017
- Volume: 32
- Issue: 2
- 17
- 1134
- Pages: 194-197
Shock-induced structural instabilities and spall-strength of maraging steels
- Year: 2017
- Volume: 32
- Issue: 2
- 6
- 1171
- Pages: 152-164
Carbon-based nanostructure created by Ba and Cs atomic layer deposition on the vicinal 3C-SiC(111) surfaces
- Year: 2017
- Volume: 32
- Issue: 2
- 6
- 1432
- Pages: 108-116
Shape memory Cu-Al-Ni single crystals for application in rotary actuators
- Year: 2017
- Volume: 32
- Issue: 1
- 13
- 1067
- Pages: 83-87
Multiscale simulations of novel additive manufactured continuous fiber-reinforced three-component composite material
- Year: 2017
- Volume: 32
- Issue: 1
- 17
- 1318
- Pages: 74-82
Flexible polyaniline coated carbon cloth as binder-free electrode material for symmetric supercapacitor application
A.A. Klimont
S.V. Stakhanova
R.R. Galimzyanov
O.V. Uryupina
K.A. Semushin
I.S. Krechetov
M. Kundu
M.V. Astakhov
- Year: 2017
- Volume: 32
- Issue: 1
- 5
- 1050
- Pages: 51-57
Residential scale solar driven cooling systems versus conventional air-conditioning in hot arid areas: a comparative study
- Year: 2017
- Volume: 32
- Issue: 1
- 1
- 1007
- Pages: 21-30
Thermal modelling of friction stir process (FSP) and identification parameters
- Year: 2017
- Volume: 32
- Issue: 1
- 7
- 913
- Pages: 14-20
Sr-doping effect on apatite type La10Si6O27 electrolyte: experiments and ab-initio calculation
- Year: 2017
- Volume: 32
- Issue: 1
- 5
- 979
- Pages: 1-7
Algorithm of combined method of 3D analysis for the boundary problems in infinite medium
- Year: 2017
- Volume: 31
- Issue: 1/2
- 1
- 784
- Pages: 82-85
The chronomechanics of deformation and strength of nanomaterials
- Year: 2017
- Volume: 31
- Issue: 1/2
- 3
- 753
- Pages: 78-81
Obtaining the nanomodifier for cement composites based on the "DEALTOM" carbon nanotubes
- Year: 2017
- Volume: 31
- Issue: 1/2
- 5
- 747
- Pages: 59-62
A complex analysis of stress-strain state of ribbed wooden structures with anisotropic sheathings
- Year: 2017
- Volume: 31
- Issue: 1/2
- 1
- 761
- Pages: 56-58
Mechanochemical growth of an elliptical hole under normal pressure
- Year: 2017
- Volume: 31
- Issue: 1/2
- 2
- 817
- Pages: 52-55
The numerical investigations of double-span concrete beams strengthened with fiber reinforced plastics across the oblique section
- Year: 2017
- Volume: 31
- Issue: 1/2
- 1
- 775
- Pages: 40-43
Analyzing thick layered plates under their own weight by the method of initial functions
- Year: 2017
- Volume: 31
- Issue: 1/2
- 2
- 730
- Pages: 36-39
Nonlinear analysis of fluid saturated soil and rock under complex hydromechanical loading on the base of poroplastic models
- Year: 2017
- Volume: 31
- Issue: 1/2
- 4
- 851
- Pages: 32-35
The solution of boundary problems for shape memory alloy cylinder and plate
- Year: 2017
- Volume: 31
- Issue: 1/2
- 4
- 867
- Pages: 23-27
Investigation of mechanical properties of nickel and "Ni-YSZ" nanocomposite at tension, compression and fatigue tests
V.G. Konakov
A.R. Arutyunyan
I.V. Lomakin
E.N. Solovyeva
O.Yu. Kurapova
N.N. Novik
I.Yu. Archakov
I.A. Ovid’ko
- Year: 2017
- Volume: 30
- Issue: 1
- 13
- 1112
- Pages: 93-101
Micromechanisms of plastic deformation in nanotwinned materials
- Year: 2017
- Volume: 30
- Issue: 1
- 12
- 1154
- Pages: 40-52
Substrate influence on the mechanical properties of TiC/a-C coatings
- Year: 2017
- Volume: 30
- Issue: 1
- 5
- 922
- Pages: 35-39
Characteristic defects-corrosion damage and mechanical behavior of dual phase rebar
- Year: 2017
- Volume: 30
- Issue: 1
- 2
- 1087
- Pages: 1-19
Study of β-Ga2O3 epitaxial layers and single crystals by nanoindentation technique
L.I. Guzilova
A.S. Grashchenko
A.I. Pechnikov
V.N. Maslov
D.V. Zav'yalov
V.L. Abdrachmanov
A.E. Romanov
V.I. Nikolaev
- Year: 2016
- Volume: 29
- Issue: 2
- 47
- 1723
- Pages: 166-171
Investigation of single crystal Cu-Al-Ni alloy bending force elements for linear motors
- Year: 2016
- Volume: 29
- Issue: 2
- 5
- 1069
- Pages: 158-165
Electrical and optical properties of transparent conducting ZnO:Al/AgNP multilayer films
E.V. Shirshneva-Vaschenko
I.M. Sosnin
R.K. Nuryev
I.A. Gladskikh
T.G. Liashenko
V.E. Bougrov
A.E. Romanov
- Year: 2016
- Volume: 29
- Issue: 2
- 2
- 1080
- Pages: 145-149
The creation of nanocoatings of various morphology on the basis of titanium dioxide on a titanium matrix for bone implant
- Year: 2016
- Volume: 29
- Issue: 2
- 6
- 1135
- Pages: 138-144
Disclinated rings as structural units in MD simulation of intercrystallite boundaries in graphene
- Year: 2016
- Volume: 29
- Issue: 1
- 1
- 1054
- Pages: 101-105
Evolution of crystal morphology under flow of low-energy particles: vacancy mechanism
- Year: 2016
- Volume: 29
- Issue: 1
- 3
- 1096
- Pages: 82-92
Accommodation of grain boundary sliding and fracture toughness enhancement in deformed nanocrystalline materials
- Year: 2016
- Volume: 29
- Issue: 1
- 5
- 1095
- Pages: 43-70
Ab initio modelling of nonlinear elastoplastic properties of diamond-like C, SiC, Si, Ge crystals upon large strainse
- Year: 2016
- Volume: 29
- Issue: 1
- 8
- 1102
- Pages: 1-16
The dynamic properties of zirconium-containing magnesium alloy MA14-T1
- Year: 2016
- Volume: 28
- Issue: 1/2
- 7
- 970
- Pages: 101-105
Dynamic analysis of 3D anisotropic elastic solids by a Laplace domain BEM
- Year: 2016
- Volume: 28
- Issue: 1/2
- 2
- 986
- Pages: 86-90
Non-stationary model of mechanical diffusion for half-space with arbitrary boundary conditions
- Year: 2016
- Volume: 28
- Issue: 1/2
- 3
- 965
- Pages: 72-76
Experimental investigation by ultrasound of engineering materials behavior under the cyclic loading
- Year: 2016
- Volume: 28
- Issue: 1/2
- 3
- 876
- Pages: 43-47
Size effect on buckling of non-uniform circular plate made of foam material
- Year: 2016
- Volume: 28
- Issue: 1/2
- 3
- 915
- Pages: 26-30
Transparent films from aluminium-doped zinc oxide fibers prepared by electrospinning method
- Year: 2016
- Volume: 27
- Issue: 2
- 2
- 1051
- Pages: 133-141
Simulation of electromechanical properties of ordered carbon nanotube arrays
- Year: 2016
- Volume: 27
- Issue: 1
- 1
- 776
- Pages: 113-117
Analysis of the opening problem of the composite materials structures with boundary integral equation method
- Year: 2016
- Volume: 27
- Issue: 1
- 3
- 793
- Pages: 108-112
Numerical approximations of Green.s functions for elastic anisotropic media by spherical harmonics, interaction energies of point defects
- Year: 2016
- Volume: 27
- Issue: 1
- 3
- 956
- Pages: 98-107
Structure and mechanical characteristics of Ni - 1 WT.% Y2O3-92ZrO2 nanocomposites fabricated by powder metallurgy method
- Year: 2016
- Volume: 27
- Issue: 1
- 3
- 917
- Pages: 90-97
Fatigue of commercially pure titanium dental implants
Timotius Pasang
M. Ramezani
Matthew Prygoski
Russell Wanhill
Rohan Byrnes
Osamu Kamiya
Kiyoshi Tanaka
- Year: 2016
- Volume: 27
- Issue: 1
- 3
- 924
- Pages: 79-89
Fatigue of commercially pure titanium dental implants
Timotius Pasang
M. Ramezani
Matthew Prygoski
Russell Wanhill
Rohan Byrnes
Osamu Kamiya
Kiyoshi Tanaka
- Year: 2016
- Volume: 27
- Issue: 1
- 3
- 847
- Pages: 79-89
Mechanical characteristics of graphene sheets containing 5-5-5-9 defects
- Year: 2016
- Volume: 27
- Issue: 1
- 8
- 1005
- Pages: 60-67
Micromechanics of twinning and detwinning processes in nanocrystalline and ultrafine-grained metals
- Year: 2016
- Volume: 27
- Issue: 1
- 1
- 1048
- Pages: 42-52
The theory of plane deformation under the conditions of austenite-martensite transformation
- Year: 2016
- Volume: 27
- Issue: 1
- 1
- 1021
- Pages: 32-41
Development of an algorithm for solving problems of fracture mechanics
- Year: 2016
- Volume: 26
- Issue: 1
- 4
- 992
- Pages: 93-96
Use of additional finite element method for nonlinear analysis of bar systems at limit states
- Year: 2016
- Volume: 26
- Issue: 1
- 2
- 964
- Pages: 77-80
Mathematical modeling of the stress-strain state of concrete dam and rock foundation caused by tectonic fault slip
- Year: 2016
- Volume: 26
- Issue: 1
- 3
- 891
- Pages: 53-56
Atomic force microscopy and physical - mechanical properties of new elastomer composites
- Year: 2016
- Volume: 26
- Issue: 1
- 3
- 1049
- Pages: 45-48
Dependence of relaxation times on the material microstructure for different mechanisms of plasticity
- Year: 2016
- Volume: 26
- Issue: 1
- 4
- 949
- Pages: 42-44
Qualimetric evaluation technique of fracture resistance of metals under shock loading
- Year: 2016
- Volume: 26
- Issue: 1
- 5
- 909
- Pages: 19-22
Application of unstructured approximating meshes in discrete-continual finite element method of structural analysis
- Year: 2016
- Volume: 26
- Issue: 1
- 1
- 860
- Pages: 5-8
Features of microstructure and mechanical characteristics of a laminated composite with high specific strength and moderate heat resistance
- Year: 2016
- Volume: 25
- Issue: 1
- 3
- 966
- Pages: 83-89
Strengthening mechanisms and properties of composite materials with carbon nanofibres
- Year: 2016
- Volume: 25
- Issue: 1
- 16
- 1183
- Pages: 30-36
Characterization of strain-induced structural transformations in CdSe nanowires using molecular dynamics simulation
- Year: 2015
- Volume: 24
- Issue: 4
- 3
- 827
- Pages: 403-409
Regulation of surface topography of nanostructured titanium using the method of ML-ALD to create bioactive nanocoatings
- Year: 2015
- Volume: 24
- Issue: 4
- 9
- 919
- Pages: 374-381
Molecular dynamics study of the thermal stability of Ni3Al nanoneedles
- Year: 2015
- Volume: 24
- Issue: 4
- 1
- 769
- Pages: 359-363
"Nickel-YSZ-nanoceramics" nanocomposite: synthesis, structure, and mechanical properties
- Year: 2015
- Volume: 24
- Issue: 4
- 4
- 1046
- Pages: 340-346
Synthesis and mechanical properties of "nanonickel-nanoceramic" composites
- Year: 2015
- Volume: 24
- Issue: 4
- 6
- 969
- Pages: 331-339
Modeling inelastic deformation of single crystal superalloys with account of γ / γ' phases evolution
- Year: 2015
- Volume: 24
- Issue: 4
- 5
- 963
- Pages: 325-330
Effect of heat treatment on the mechanical properties of ultrafine-grained aluminium
- Year: 2015
- Volume: 24
- Issue: 4
- 3
- 890
- Pages: 319-324
Study of copper work-hardening behavior on a single sample experienced inhomogeneous dynamic deformation
- Year: 2015
- Volume: 24
- Issue: 3
- 3
- 1044
- Pages: 253-258
Kinetics of grain refinement in metallic materials during large strain deformation
- Year: 2015
- Volume: 24
- Issue: 3
- 7
- 950
- Pages: 224-231
Modeling of deformation and fracture of nanotitan cylinder specimens coated by nanoceramic on the basis of zirconium dioxide under local impacts
- Year: 2015
- Volume: 24
- Issue: 2
- 2
- 818
- Pages: 178-186
Modeling and simulation of Ni nanofilm using Morse pair potential
- Year: 2015
- Volume: 24
- Issue: 2
- 4
- 938
- Pages: 139-144
Study of conditions for the increase of surface hydrophobization of nanostructured titanium with titanium organic nanostructures brush type on the surface
- Year: 2015
- Volume: 24
- Issue: 2
- 2
- 1066
- Pages: 129-138
Approach for electrochemical deposition of copper-graphite films
- Year: 2015
- Volume: 24
- Issue: 1
- 9
- 1032
- Pages: 61-71
The influence of stress distribution on stability of the displacement of conical indenter into the soil medium
- Year: 2015
- Volume: 23
- Issue: 1
- 2
- 841
- Pages: 91-94
Computing weakly parallelized calculations of objects made of materials with complex physical-mechanical properties
- Year: 2015
- Volume: 23
- Issue: 1
- 3
- 892
- Pages: 87-90
About the specifics of identification thermomechanical characteristics of functionally graded hollow cylinder
- Year: 2015
- Volume: 23
- Issue: 1
- 4
- 938
- Pages: 71-75
Some properties of the thermoelastic prestressed medium Green function
- Year: 2015
- Volume: 23
- Issue: 1
- 2
- 932
- Pages: 42-46
Method of the equivalent boundary conditions in the unsteady problem for elastic diffusion layer
- Year: 2015
- Volume: 23
- Issue: 1
- 2
- 898
- Pages: 36-41
Peculiarities of the wave field localization in the functionally graded layer
- Year: 2015
- Volume: 23
- Issue: 1
- 3
- 886
- Pages: 25-30
Influence of point defects on ultrasonic waves propagating in the thin plate
- Year: 2015
- Volume: 23
- Issue: 1
- 2
- 854
- Pages: 20-24
The mathematical model for anisotropic material with auxetic properties
- Year: 2015
- Volume: 23
- Issue: 1
- 5
- 1056
- Pages: 5-9
Photoemission study of nano SiC epitaxial layers synthesized by a new method of the atom substitution in Si crystal lattice
G.V. Benemanskaya
P.A. Dementev
S.A. Kukushkin
M.N. Lapushkin
A.V. Osipov
B. Senkovskiy
S.N. Timoshnev
- Year: 2015
- Volume: 22
- Issue: 2
- 7
- 1022
- Pages: 183-190
The theory of plane deformation under the conditions of austenite-martensite transformation
- Year: 2015
- Volume: 22
- Issue: 2
- 3
- 1015
- Pages: 176-182
The heterogeneity of the stress-strain state during severe plastic deformation by multiple extrusion
- Year: 2015
- Volume: 22
- Issue: 2
- 7
- 965
- Pages: 170-175
Research on piezoelectric quartz under multidimensional forces
- Year: 2015
- Volume: 22
- Issue: 1
- 3
- 934
- Pages: 94-100
Shape memory deformation recovery features in Cu-Al-Ni single crystals
A.I. Averkin
P.N. Yakushev
E.V. Trofimova
G.P. Zograf
R.B.Timashov
S.A. Pulnev
S.B. Kustov
V.I. Nikolaev
- Year: 2015
- Volume: 22
- Issue: 1
- 11
- 1070
- Pages: 64-68
Elastodynamic response due to mechanical forces in a microstretch thermoelastic medium with mass diffusion
- Year: 2015
- Volume: 22
- Issue: 1
- 3
- 922
- Pages: 44-47
Influence of mechanical deformation and heat treatment on the state of silver nanoparticles in photo-thermo-refractive glasses
- Year: 2015
- Volume: 22
- Issue: 1
- 2
- 942
- Pages: 39-43
Usage of nanoceramic based on ZrO2 in fabrication of sources for magnetron sputtering
- Year: 2014
- Volume: 21
- Issue: 3
- 12
- 1090
- Pages: 305-310
Finite-element Analysis of Deformation of Titanium Cylinder with a Ceramic Coating under Axial Compression
- Year: 2014
- Volume: 21
- Issue: 3
- 3
- 937
- Pages: 299-302
Thermal analysis of phosphor containing silicone layer in high power LEDs
- Year: 2014
- Volume: 21
- Issue: 3
- 2
- 1018
- Pages: 283-287
Requlation of the surface microrelief of coarse-grained and ultrafine-grained titanium by etching method
G.S. D'jkonov
E.V. Stenina
E.V. Sviridova
G.Ch. Salimgareeva
I.P. Semenova
E.G. Zemtsova
Р.З. Валиев
- Year: 2014
- Volume: 21
- Issue: 3
- 5
- 1103
- Pages: 259-265
Inorganic composite "phosphor in glass" based on highly refractive LED-silicate matrix for white LEDs
V.A. Aseev
J.V. Tuzova
A.Y. Bibik
E.V. Kolobkova
Ya.A. Nekrasova
N.V. Nikonorov
M.A. Shvaleva
A.E. Romanov
V.E. Bougrov
- Year: 2014
- Volume: 21
- Issue: 3
- 5
- 1155
- Pages: 242-247
Dynamic theory of coexisting austenite-martensite phase formation
- Year: 2014
- Volume: 21
- Issue: 3
- 3
- 961
- Pages: 230-235
Ping-pong fixed abrasive diamond wire saw slicing piezoelectric crystal quartz
- Year: 2014
- Volume: 21
- Issue: 2
- 3
- 930
- Pages: 168-176
Morphological and phase transformations in nickel coatings on stainless steel in temperature fields
- Year: 2014
- Volume: 21
- Issue: 2
- 4
- 1038
- Pages: 119-125
Dynamic strength of nitrogen steels
Yu.I. Meshcheryakov
A.K. Divakov
N.I. Zhigacheva
G.V. Konovalov
B.K. Barakhtin
G.Yu. Kalinin
O.V. Fomina
- Year: 2014
- Volume: 21
- Issue: 2
- 5
- 1111
- Pages: 99-111
Semipolar GaN on Si(001): the role of SiC buffer layer synthesized by method of substrate atom substitution
- Year: 2014
- Volume: 21
- Issue: 1
- 4
- 945
- Pages: 71-77
The theory of coexisting austenite-martensite phase formation
- Year: 2014
- Volume: 21
- Issue: 1
- 4
- 882
- Pages: 58-70
Modeling stress-strain state thick cylindrical shells made of materials with complicated properties
- Year: 2014
- Volume: 21
- Issue: 1
- 4
- 806
- Pages: 38-49
Modelling of the fine precipitates effect strengthening of Al-Mg-Si alloys under ageing
- Year: 2014
- Volume: 21
- Issue: 1
- 2
- 1106
- Pages: 29-37
Thermal analysis of bimetal plates as cooking pots: computational comparison of two geometries
- Year: 2014
- Volume: 21
- Issue: 1
- 11
- 1070
- Pages: 8-16
Molecular dynamic study for ultrathin nickel nanowires at the same temperature
- Year: 2014
- Volume: 21
- Issue: 1
- 4
- 722
- Pages: 1-7
Plasma-mechanical oscillations in carbon nanotubes array
- Year: 2014
- Volume: 20
- Issue: 2
- 2
- 932
- Pages: 87-91
Dependence of gallium nitride nanowires properties on synthesis pressure and temperature
- Year: 2014
- Volume: 20
- Issue: 1
- 2
- 802
- Pages: 73-79
Effect of pulsed electric current on deformation of amorphous and nanocrystalline metallic alloys aged in acidic environments
- Year: 2014
- Volume: 20
- Issue: 1
- 3
- 887
- Pages: 67-72
Thermo-kinetic austenite transformation in thin-sheet steels
- Year: 2014
- Volume: 20
- Issue: 1
- 3
- 796
- Pages: 62-66
Electronic properties of quasi-two-dimensional molybdenum disulfide with Fe, Co, and Ni impurities
- Year: 2014
- Volume: 20
- Issue: 1
- 2
- 872
- Pages: 44-50
Investigation of electronic properties of Ni2MnGa and Co2MnGa Heusler alloys
- Year: 2014
- Volume: 20
- Issue: 1
- 5
- 1039
- Pages: 37-43
Dissolution of fullerenes C60 and C70 in organic oils
- Year: 2014
- Volume: 20
- Issue: 1
- 8
- 915
- Pages: 33-36
Designing mini-fullerenes and their relatives on graph basis
- Year: 2014
- Volume: 20
- Issue: 1
- 3
- 952
- Pages: 18-24
Possible ways of forming mini-fullerenes and their graphs
- Year: 2014
- Volume: 20
- Issue: 1
- 2
- 942
- Pages: 1-11
Grain boundary mechanisms of misfit stress relaxation in nanocrystalline films and coatings
- Year: 2014
- Volume: 19
- Issue: 1
- 6
- 993
- Pages: 68-87
Influence of abrasive water jet machining parameters on the surface roughness of eutectic Al-Si alloy - graphite composites
- Year: 2014
- Volume: 19
- Issue: 1
- 3
- 952
- Pages: 1-8
Generalized magneto-thermoelasticity for an infinite perfect conducting body with a cylindrical cavity
- Year: 2013
- Volume: 18
- Issue: 2
- 1
- 911
- Pages: 156-170
Layer number dependence of temperature distribution in multi-metal cookware
- Year: 2013
- Volume: 18
- Issue: 1
- 2
- 874
- Pages: 70-76
Modeling and investigations of the heterofullerenes C59X (X=Na, Li, Mg, Be)
- Year: 2013
- Volume: 18
- Issue: 1
- 1
- 872
- Pages: 63-69
Effect of volume on the mechanical properties of nickel nanowire
- Year: 2013
- Volume: 18
- Issue: 1
- 4
- 806
- Pages: 42-52
Creation of heterogeneity on the basis of carbide nanostructures in the volume of metal (iron) matrix for regulation of mechanical properties
- Year: 2013
- Volume: 18
- Issue: 1
- 6
- 840
- Pages: 42-52
Fabrication and characterization of TiO2 particulate filled glass fiber reinforced polymer composite
- Year: 2013
- Volume: 18
- Issue: 1
- 4
- 877
- Pages: 28-34
Effects of pre-tightening force and connection mode on the strength and progressive damage of composite laminates with bolted joint
- Year: 2013
- Volume: 18
- Issue: 1
- 5
- 901
- Pages: 18-27
Defects in the elastic continuum: classification, fields and physical analogies
- Year: 2013
- Volume: 17
- Issue: 1
- 29
- 1246
- Pages: 71-91
Simulation of shell made of isotropic different resistance graphite using volumetric finite elements considering connectedness of stresses and temperatures
- Year: 2013
- Volume: 17
- Issue: 1
- 4
- 960
- Pages: 59-70
Low temperature sol-gel technique for processing Al-doped Zinc Oxide films
- Year: 2013
- Volume: 17
- Issue: 1
- 4
- 1090
- Pages: 38-46
The effect of sandblasting time on producing nanocrystalline surface of PO733 steel (DIN: 1.8509)
- Year: 2013
- Volume: 17
- Issue: 1
- 0
- 885
- Pages: 33-37
Effect of milling time on mechanochemical synthesis of nanocrystalline zirconium diboride
- Year: 2013
- Volume: 17
- Issue: 1
- 2
- 865
- Pages: 1-5
Fundamental solution for two-dimensional problem in orthotropic piezothermoelastic diffusion media
- Year: 2013
- Volume: 16
- Issue: 2
- 5
- 865
- Pages: 159-174
Synthesis of hydrophilic polypyrrole thin films by SILAR method
- Year: 2013
- Volume: 16
- Issue: 2
- 1
- 869
- Pages: 118-125
Effect of fibre length and fibre content on mechanical properties of short basalt fibre reinforced polymer matrix composites
- Year: 2013
- Volume: 16
- Issue: 2
- 7
- 979
- Pages: 107-117
Synthesis, growth and characterization of novel semiorganic nonlinear optical Potassium Boro-Oxalate (KBO) single crystals
- Year: 2013
- Volume: 16
- Issue: 1
- 1
- 875
- Pages: 92-100
Hybrid energy harvesting from vibration and temperature gradient by PZT and PMN-0.25PT ceramics
- Year: 2013
- Volume: 16
- Issue: 1
- 3
- 910
- Pages: 55-65
Uniqueness, reciprocity theorem and variational principle in fractional order theory of thermoelasticity with voids
- Year: 2013
- Volume: 16
- Issue: 1
- 6
- 945
- Pages: 1-24
Physical properties of titanium nitride thin film prepared by DC magnetron sputtering
- Year: 2012
- Volume: 15
- Issue: 2
- 2
- 831
- Pages: 167-172
A study of Green's functions for two-dimensional problem in orthotropic magnetothermoelastic media with mass diffusion
- Year: 2012
- Volume: 15
- Issue: 1
- 1
- 857
- Pages: 78-95
Dielectric and photoconductivity properties of L-arginine diiodate nonlinear optical single crystaly
- Year: 2012
- Volume: 15
- Issue: 1
- 0
- 889
- Pages: 74-77
Computational modeling of blast furnace cooling stave based on heat transfer analysis
- Year: 2012
- Volume: 15
- Issue: 1
- 2
- 875
- Pages: 46-65
Intensified movement of defects during severe plastic deformation
- Year: 2012
- Volume: 15
- Issue: 1
- 2
- 965
- Pages: 26-33
Theoretical studies of solid state dielectric parameters of hydroxyapatite
- Year: 2012
- Volume: 14
- Issue: 2
- 1
- 871
- Pages: 145-151
A Review of Thermal and Mechanical Analysis in Single and Bi-layer Plate
- Year: 2012
- Volume: 14
- Issue: 1
- 4
- 993
- Pages: 37-46
Hot Corrosion Behaviour of Nickel Chromium Coating at Different Temperatures (800 °C and 900 °C) on SA213 T91 Boiler Steel Weldments
- Year: 2012
- Volume: 14
- Issue: 1
- 4
- 924
- Pages: 11-30
Agglomerate Size in Precursors and Mechanical Strength of Solid Electrolytes Based on Y2O3-ZrO2, Ce2O3-ZrO2 and Ce2O3-Y2O3-ZrO2 Systems
- Year: 2012
- Volume: 14
- Issue: 1
- 5
- 1028
- Pages: 1-10
Multi Scale Modeling of Thermoelastic Properties of Composites with Periodic Structure of Heterogeneities
- Year: 2012
- Volume: 13
- Issue: 2
- 1
- 933
- Pages: 130-142
Electronic Properties of Ternary Compounds with Vacancy Clusters: ab initio Simulation
- Year: 2012
- Volume: 13
- Issue: 2
- 1
- 849
- Pages: 124-129
Change in the Transformation Sequence due to Stress-Free Thermal Cycling of Ni-Ti Shape Memory Alloy
- Year: 2012
- Volume: 13
- Issue: 1
- 2
- 920
- Pages: 64-69
Diamagnetism Appearance of Onion-like Carbon Suspension by Laser Radiation
- Year: 2012
- Volume: 13
- Issue: 1
- 1
- 881
- Pages: 37-47
Atomic and Electronic Structure of Mini-Fullerenes: from Four to Twenty
- Year: 2012
- Volume: 13
- Issue: 1
- 3
- 1035
- Pages: 22-36
Change of the Scattered Power of the Surface Acoustic Wave Propagating along the Surface of Gallium Arsenide in Process of Deposition of Gold Films pages
- Year: 2011
- Volume: 12
- Issue: 2
- 1
- 965
- Pages: 174-185
Deviation of the Velocity of the Surface Acoustic Wave Propagating Along the Surface of Gallium Arsenide in the Process of Depositing of Gold
- Year: 2011
- Volume: 12
- Issue: 2
- 2
- 1064
- Pages: 161-173
Influence of Water Absorption on Mechanical Properties of Coconut Coir Fiber/Poly-Lactic Acid Biocomposites
- Year: 2011
- Volume: 12
- Issue: 2
- 5
- 1082
- Pages: 113-125
Crack Generation in Nanomaterials at High-Strain-Rate and Quasistatic Regimes of Deformation
- Year: 2011
- Volume: 12
- Issue: 1
- 2
- 896
- Pages: 76-101
Electronic Stopping Power of Various Organic Compounds for Proton (0.05-10 MeV): a Comparative Study
- Year: 2011
- Volume: 12
- Issue: 1
- 2
- 869
- Pages: 43-57
Correlation between the Precursor Dispersity and Mechanical Strength of Solid Electrolytes Based on Ce2O3-ZrO2 System
- Year: 2011
- Volume: 11
- Issue: 2
- 3
- 967
- Pages: 183-189
Liquefied Tropical Wood/Polypropylene Composites: Preparation and Physico-mechanical Properties
- Year: 2011
- Volume: 11
- Issue: 2
- 3
- 909
- Pages: 126-136
Agglomerate Size in Precursors and Mechanical Strength of Solid Elestrolytes Based on Y2O3-ZrO2 System
- Year: 2011
- Volume: 11
- Issue: 1
- 5
- 1063
- Pages: 68-75
Band Structure, Density of States and Superconductivity of Adsorbed Titanium Chains on (8,8) and (14,0) Carbon Nanotubes
- Year: 2010
- Volume: 10
- Issue: 1/2
- 4
- 936
- Pages: 72-81
Distributed Computing in the National-Wide Lung Screening and Diagnosis System: First Steps
- Year: 2010
- Volume: 9
- Issue: 3
- 1
- 821
- Pages: 175-184
Influence of Dispersion on Cross Flows in Gaz Mechanics
- Year: 2010
- Volume: 9
- Issue: 2
- 2
- 924
- Pages: 105-110
DSC-Investigations of the Effect of Annealing Temperature on the Phase Transformation Behaviour in Ni-Ti Shape Memory Alloy
- Year: 2010
- Volume: 9
- Issue: 1
- 5
- 1008
- Pages: 75-83
Coupled Problems of Mechanics and Chemical Physics in the Technology for Producing Composite Polymer Materials
- Year: 2009
- Volume: 8
- Issue: 1
- 3
- 918
- Pages: 32-64
Long-term Strength Prediction for Chromium-Nickel Austenitic Steels Based on Short-term Experimental Results
- Year: 2004
- Volume: 7
- Issue: 1
- 1
- 924
- Pages: 72-78
Semigrand Canonical Monte Carlo Simulation with Gibbs-Duhem Integration Technique for Alloy Phase Diagram
- Year: 2003
- Volume: 6
- Issue: 1
- 2
- 859
- Pages: 49-57
Heteroepitaxy of Gallium Nitride Layers: the Role of Initial Stages in Film Formation
- Year: 2003
- Volume: 6
- Issue: 1
- 6
- 985
- Pages: 1-12
Nanostructured Vacuum ARC Deposited Titanium Coatings
- Year: 2002
- Volume: 5
- Issue: 1
- 4
- 992
- Pages: 39-42
Calorimetric Measurements of Grain Growth in Ultrafine-Grained Nickel
- Year: 2002
- Volume: 5
- Issue: 1
- 1
- 883
- Pages: 23-30
Nanostructures of Polyaniline Doped with a Novel Dopant
- Year: 2001
- Volume: 4
- Issue: 2
- 3
- 856
- Pages: 125-128
Novel Photocatalyst Immobilized on Springs and Packed Photoreactor
- Year: 2001
- Volume: 4
- Issue: 2
- 4
- 840
- Pages: 121-124
Development of Amorphous and Nano-Aluminade Dispersed Al-Matrix Composites by Mechanical Alloying
- Year: 2001
- Volume: 4
- Issue: 2
- 1
- 891
- Pages: 116-120
Effects of STM Tip Movement to the Real Width of an Electric Pulse Acting on the Gap between the Tip and the Sample Surface
- Year: 2001
- Volume: 4
- Issue: 2
- 1
- 891
- Pages: 111-115
STM-based Charge-Injection Spectroscopy at the Organic/Metal Interface
- Year: 2001
- Volume: 4
- Issue: 2
- 1
- 941
- Pages: 76-80
Nanostructured Iron-Nickel Thin Films Synthesized by Electroless Polyol Deposition
- Year: 2001
- Volume: 4
- Issue: 1
- 1
- 1025
- Pages: 56-61
Analysis of Surface Effects on Mechanical Properties of Microcantilevers
- Year: 2001
- Volume: 4
- Issue: 1
- 2
- 774
- Pages: 51-55
A Practical Nanoscopic Raman Imaging Technique Realized by Near-field Enhancement
- Year: 2001
- Volume: 4
- Issue: 1
- 3
- 741
- Pages: 17-21
Mapping of Switching and Anisotropy Fields in Magnetic Nanoparticles
- Year: 2001
- Volume: 4
- Issue: 1
- 3
- 917
- Pages: 1-4
Structural Design and Properties of Layered Nanocomposite Titanium Carbide-Silicide Materials
- Year: 2001
- Volume: 3
- Issue: 1
- 2
- 877
- Pages: 101-107
Copper-Matrix Cu-HfO2 Nanocomposite Compacts of Full Density
- Year: 2000
- Volume: 2
- Issue: 1
- 2
- 1054
- Pages: 63-69
High-Strength Nanocrystalline Ni-Alloys Produced by Electrodeposition
- Year: 2000
- Volume: 1
- Issue: 2
- 4
- 906
- Pages: 127-132
Superplasticity and microstructure evolution in nanonickel
- Year: 2000
- Volume: 1
- Issue: 2
- 4
- 982
- Pages: 98-102
InOx Thin Films, Candidates for Novel Chemical and Optoelectronic Applications
- Year: 2000
- Volume: 1
- Issue: 2
- 1
- 1054
- Pages: 83-97
Mechanical and Magnetic Properties of Polyol Electrodeposited NiCo Films
- Year: 2000
- Volume: 1
- Issue: 2
- 1
- 1115
- Pages: 67-65